Brother if you are asking it for burning, don't even think about it. Motor oil has lead, benzene, zinc, cadmium, and even arsenic and many other toxic chemicals which not only harm you and others around you but also have a dreadful effect on environment.
The heating time constant is the time that an induction motor takes to reach it's operational temperature.
can a home hot water heating system (radiators) be converted to gas fueled from oil fueled heating meathods?
Gasoline, jet fuel, kerosene, diesel for cars, and heating oil are the most common.
#2 fuel oil = 140,000 btu/gallon. Psi does not matter.
you can use 5w-30 or 10w-30 motor oil
.Mixing a small amount of oil in the diesel fuel will not hurt a motor. The motor will run rough and produce black smoke.
Coolant mixing with the oil from a blown head gasket.
If its an oil injected motor there is a tank that holds the mixing oil if its just a straight carburated motor the oil mixes with the gas in a can then put it in the gas tank.
50 to 1 oil and gas mixture
Could be oil mixing with antifreeze indicating a bad head gasket Are you losing motor oil?
If the seals between oil and fuel has been damaged then mixing will happen, take the motor to a qualified repairer
If it's mixing coolant with the motor oil, not for long.
Mixing ratio should be 50:1
by mixing the burn motor oil with grove heater the diesel will burn slower
no but not mixing fuel to oil ratio correctly will seize a motor
Most of the crude oil is used to obtain... Motor Gasoline, diesel, heating oil, jet fuel, and liquefied petroleum gases.
An Oil Injected motor will have a separate Oil Resevoir, so mixing Oil and Gas is not required, and in fact inadvisable.