The mixture depends on the concrete strength, flow properties and other specifications required, quality of cement, aggregates and other chemical additives that will be used.
Typically 1 cubic meter concrete should include about 310kg cement, 800kg sand, 900kg gravel and 220kg water.
Concrete is a mixture of cement, sand, stone, and water. In a cuibic meter of concrete, , there is about 0.3 cubic meters of sand, or about 475 kg
A typical mixture of concrete will be 10 to 15% cement, 60 to 75% aggregate, and 15 to 20% water.
average of 0.12tons of rebars per cubic meter of concrete.
Concrete is sold in cubic (volume) measurements not square (area) measurements.
concrete 2400 Kg/m3aluminun 2712 Kg/m3
The mass of a cubic metre of concrete is 2250-2400 kilograms.
One cubic meter is equivalent to 35.23 cubic feet, or one cubic meter is equivalent to 1.35 cubic yards.
7 cement bags per 1 cubic meter of concrete......
According to concrete taxi: http://www.concretetaxi.com/faq.asp#77 ~15 wheelbarrow loads in a single cubic meter of concrete According to concrete taxi: http://www.concretetaxi.com/faq.asp#77 ~15 wheelbarrow loads in a single cubic meter of concrete
A cubic metre (or 'stere' as it is correctly known ) is 35.1 cubic feet. -In wet asphalt concrete that weighs about 5,250 pounds - just over 2 and a half tons !
I'm assuming by bricki you mean aggregate? There are several different mixes of concrete that yield different strengths. One of the more common mixes is a 3/2/1 mix this combines 3 parts aggregate (crushed stone), 2 parts sand and 1 part portland cement. with this mixture to make 1 cubic meter of concrete you will need almost 1/2 cubic meter of aggregate, 1/3 cubic meter sand and 1/6 cubic meter portland cement mixed with about 75 liters of water. Different mixes use varying amounts of stone though the sand and cement mixture stays between 1 1/2 : 1 to 2:1
According to Blue Circle it takes 108 bags of concrete to get a cubic meter