the Monte has many bolts, which ones?
Bolts on the caliper of a 1999 Monte Carlo will loosen to the left and tighten to the right.
Ther are a lot of bolts in the 95 monte, which bolts are you talking about?
.The 2000 Chevrolet Monte Carlo brake caliper bolt size is 9/16. The brake caliper bolt can be purchased at most auto-parts stores
There is no drain plug on the tranny, you have to take all the bolts out of the pan and drop the pan.
No. One of the two bolts that hold the thermostat housing to the engine is a challenge.
you have to remove the throttle body and use 13mm rench to take the thermostat housing bolts off
Remove the water supply hose from the top of your 2003 Chevy Monte Carlo thermostat housing. Remove the thermostat housing retaining bolts. Lift the old thermostat out. Drop the new thermostat in and reverse the process.
There are bolts that you must remove in order to take out the front seats of a 2002 Monte Carlo. There are two in the back of the seat and two in the front of the seat. If you have heated seats you will also have to remove the wires for that before you take the seat out.
the oil pan has to come off the engine and then you will see the oil pump and the bolts that hold it in.
Remove the positive cable from your 1998 Monte Carlo battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
Drain the water from your 1997 Chevy Monte Carlo cooling system. Remove the water supply hose. Remove the thermostat housing retaining bolts. The thermostat will lift out. Reverse the process to install the new thermostat.
Start by removing the lines, drain the fluids, then remove the pump pulley. After that, remove the mounting bolts.