Chevy S-10
Chevy Blazer S-10

Need to set timing on 2.8 v6 Chevy s10?


Top Answer
User Avatar
Wiki User
2014-06-05 09:11:41
2014-06-05 09:11:41

The timing on a 2.8 V6 Chevy S10 needs to be set any time the valves, heads, or crankshaft are worked on. The gears of the timing chain and timing sprocket need to be aligned to set initial timing.

User Avatar

Related Questions

There is no timing to set. The timing is controlled by the ECM with signals it receives from various sensors.

Chevrolet s10 v6 2.8 liter pickup timing degree, how to set the degree

Chevy S10 in 2001 didn't have a 2.0L engine. They had a 2.2L engine and it has a (DIS) distributorless ignition system. There is no timing to set.

I have a 1987 Chevy Blazer S 10 4X4 2.8l V6 and the timing recommendation is 10 degrees.

There is a big difference in how timing is set. We need to know what year.

on the harmonic balancer there are two marks, one set at 12o'clock and set at 3o'clock, standing in front of the engine, where do both marks need to be set?

How do you set the timing on a 2000 Chevy blazer (V6)

You don't. It's done electronically with information from various sensors sent to the engine control module.

Answer timing 95 4.3 vortec Chevy blazerTiming is non adjustable, period. The high voltage switch ( or known as the distributor) is pinned into lower intake and cannot be moved. The timing is controled by the computer.

Ignition timing is electronically controlled.

The only way to set the timing is with a OBDII engine scanner. You CANNOT use a timing light. The timing is computor controlled.

Need to KNOW the YEAR of the engine. And what it is in.

In order to set the timing on a 98 Chevy 350 vortex, you have to time with a scan tool that will let you set timing. Or let garage do it

how do you set the timing for a 1997 Chevy 350 5.7 engine

how do i set the timing for a chevy 350 small block?

timing does not need to be set on the 1.3l engine in model year 1999 as it is a distributor less igniton system all timing is done by the ecm

You don't, it is done electronically.

That requires an engine scanner to set the timing.

The timing is computer controlled and there is NO need to fool with the timing as long as you have not moved or touched the distributor. It requires an OBDII engine scanner to adjust the timing.

How do you set timing on 1988-1995 Chevy Tahoe moters 5.7l?

Follow the directions on the emissions label under the hood of your car, it will tell you what to set the timing at and what connectors to disconnect to set the timing.

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.