It is located just above the oil filter (located in front of engine under exhaust manifold)
Back of the engine, next to the distributor.
Next to the oil filter in front of engine, wire plug on top.
The oil pressure sensor on a Dodge Caliber is under the intake manifold on the front of the engine.
Behind carb. at rear of motor with little wire going to it.
Back of the engine, just to the passenger side of the distributor.
The 1988 Dodge Dynasty coolant fan sensor is located a few inches above the thermostat housing. The thermostat housing can be found on the front of the engine.
The governor pressure sensor is located within the transmission's fluid pan. It's mounted on a bracket with three 11 mm bolts and two #25 torx screws. This was on a '99 Dodge Durango with a 5.9 L motor.
Located on the power steering gear box by the front cross member.
A Dodge Neon does not have a mass airflow sensor.
uh what transmission. what sensor
It threads into the exhaust manifold on the back of the engine.
The speed sensor, on your Dodge Stratus, is located on the back of the transmission. The speed sensor has a wire leading to the front wheel.