2.5cm is equal to 1 inch
That's just a tiny bit less than one inch.
to understand this answer we have to assume the following as givin fact. fluids do not compress, that out of the way, the hydraulic piston you push is a smaller diameter than the piston that does the work. for example lets say that you are using a 1 square inch piston as the one you are pressing, and you are using a 100 square inch piston as the one doing work. these numbers are greatly exaggerated but will work for the example if you put 10 pounds of pressure on the 1 inch cylinder, you will have 10 psi of pressure. when this is routed to the 100 square inch cylinder you will still have 10 psi of pressure, but now it is acting on 100 square inches (10 pounds per square inch times 100 square inches) this would calculate to 1000 pounds. it would be the same as a 1001 inch lever with the fulcrum being 1 inch in from one end, only you would exert force on the larger lever to gain a mechanical advantage. hydraulics used in this way are known as liquid levers
If one takes a look at the schematic drawing of an auto-retract clamp and drill hydraulic circuit, one will see the single-acting clamp cylinder and quarter of an inch operator control valve. It also has double-acting work cylinder, as well as quarter inch air sequence valve.
I hope you mean a 5/8 bolt (58 inches would take a machine to turn). Measure your bolt head across the opposing flats. For a 5/8 bolt it may be 1 inch or even larger. The last one I did was in a truck's shock mounting and that took a 1.25 inch socket.
Just one big one
39.3 inches in a meter
There are 25,400,000 nanometers in one inch.
1 inch is 2.54cm
1 meter = 39.3700787 inch
1 meter=39.3700787 inches
Approximately 39
A nanometer is 10-9 meter, and a meter is 39.37 inches
There are 36 inches in a yard and 39.37 inches in a meter.
inch are in one miter 1 inch=0.0254 m
Nope. One meter is equal to about 39.4 inches.
1 meter = 39.3700787 inch got it from google. just type in the conversion
The conversion between m and inch are given .On finding the relation we get as follows . we know , 1 inch = 0.0254m. 0.0254 meter are there in 1 inch