There are three primary elements; the primary mirror that magnifies the incoming light, the secondary mirror which directs the light into the eyepiece, and the objective lens, which focuses the light into an image.
glass and silver; also speculum metal or stainless steel
the parts of the spherical mirror are pole, centre of curvature,radius of curvature.
basta ang cute tala ni AEJAY MALLARI :) WALA AKO MAHANAP NG SAGOT
TXT TXT TAU.....
HAHAHA KJ :)
the front part is a sheet of glass, and the back part is a thin layer of reflective silver or aluminum
Sellers of carpets!
A Punnet square has 2 parts on the left and 2 parts on the top. It is used to help make sure you don't forget any parts of combinations. The parts on the sides are combined to make a two part thing in the midde. For example a xx and a xy can combine in the squares to make two xx and two xy squares.
On eyeglasses? Two lenses = bifocals Three lenses = Trofocals
The two parts of an ecosystem are Producers and Consumers. Producers are plants and other organisms that produce their own food. Consumers are the organisms that eat producers to survive.
Glycerol and fatty acids
The two main parts of setting are time and place.
The most curved mirrors are spherical mirrors. The centre of curved surface is called center of curvature. There are two kinds of spherical mirrors. Concave and convex mirror.
Two types of curved mirrors are: concave and convex.
It has two mirrors set at an angle of 60o.
Reflecting TelescopeA reflecting telescope uses a lens and two mirrors. The lens is positioned at the eyepiece, and thus the focus, which the two mirrors generated by specifically redirected light. There are two types of reflecting telescopes with one lens and two mirrors, the Newtonian Focus and the Cassegrain Focus.
infinite mirrors
There are two parts to breaking dawn because the movie would be longer than titanic and restrictions make the people have to make to parts.
An incline is a ramp or gentle slope. Inclined mirrors are two or more facing mirrors that are not both perpendicular to each other in two directions. For example, if two mirrors were on opposite walls of room, then one edge of one mirror were twisted (lifting the bottom off the wall or the right side), then the mirrors would be inclined from each other.
The number of images increases
The Mirror of Erised and the two-way mirrors are not real things.
In a PERFECT System with Perfect Mirrors reflecting 100% of the Energy that strikes it....two parallel mirrors will reflect light striking it at 90 degrees to their surfaces an INFINITE number of times. Of course that System does not exist. Mirrors are NOT 100% Reflective. It is impossible to make two flat objects Perfectly Parallel, and Introducing a Perfectly Perpendicular Light Beam into the System is NOT Possible either.
Six, if you count the two tweeters on the inside of the side mirrors on most models.
The mirrors are different sizes