what about them?
yeah for real, my door locks work pretty well.
The power locks can only be engaged from the driver's door. You press down on the door lock on the driver's door and it will lock all the doors. Or you turn the key in the lock to the right in the door lock of the driver's door and it will lock all of the doors.
Door locks are protected by circuit breakers. A surge of power to a fuse would cause it to blow. They are located in the fuse panel.
I replaced the drivers door switch on mine and it took care of the problem
If the power door locks quit working on a 1979 Corvette, it is due to broken pigtail switches. With age and use, the pigtails break and leaves the power door locks inoperable.
power door locks don't work on my 1997 Honda crv
Not necessarily. Keyless entry will have power door locks, but not all power door locks are coupled to a keyless entry system.
1) Water has gotten into one of the door lock switches and corroded it. or 2) GEM module is shot.
The driver door does not unlock the power locks for a few reasons. This motor could be burned out or the wires could not be attached correctly.
Remove the power locks and windows fuse you will loose power for your windows also
Chances are it is the keypad on the driver's door malfunctioning. I had this happen to my 2001 continental. It affected the locks and also the dome light. Hope this helps. It cost me about 280.00 total to have it repaired
mine doesn't have
Pull the fuse