mx6 got no moonroof - only a sunroof and YES its interchangeable
its under the radio
Under the thermostat housing
To replace the AC belt on a 1993 Mazda MX-6, first, disconnect the negative battery terminal for safety. Locate the AC compressor and identify the tensioner pulley; loosen the tension by turning the tensioner bolt or adjusting the mounting bolts. Remove the old belt and install the new one, ensuring it follows the correct routing path. Finally, re-tension the belt, check its alignment, and reconnect the battery terminal.
it is in ths distributor i just changed my for 80.00
ok buddy , i am talking about 1993 Mazda mx6 4 cyl. when you look down you can see the one side of the alternator . put your hand on the back side which you can't see you will find a mounting bolt .you will feel it with your hand . that needs to be loosened first before you can loosen that the long tension bar . good luck , i just replaced the drive belts today ...ouff azzaro
i drive a 94 Mazda mx6 and the answer to your questions is it takes 4 quarts of oil! i drive a 94 Mazda mx6 and the answer to your questions is it takes 4 quarts of oil!
5 speed or automatic?
most parts are yes. most parts are also interchangeable for ford probes of the same year range (excluding body parts of course --- Many interchangeable parts on 1993 Mazda Mx6: 1993-1996 Mazda 626 1993-1996 Ford Probe some parts off the Mazda MX3 some parts off the 1998-2003 Mazda Protege some parts with 1996 are not compatible due to OBDII legislature, which changed emissions and other changes.
What do you need to know about the exhaust, and are you talking about a 4 or 6 cyl.
5 foot lbs
YOu need to blead the system .. then it should require no adjusting