Want this question answered?
How do you replace spark plugs on a 2004 Sable - Taurus?
Can figure out how to remove rear rotor assembly to replace wheel bearing assembly on a Maxima 2004 Nissan
Vanished - Front Line Assembly song - was created on 2004-06-22.
You can't replace just the wheel bearings. You have to replace the whole hub assembly. Costs about 200 bucks per wheel at a repair shop. I have had both of mine replaced.
To replace the daytime running light on a 2004 Suburban, you will have to first remove the two metal pins that can be found on top of the headlight. The headlight assembly can be removed next. Pull out the plugs that are connected to the headlight assembly. Replace the bulbs and then reconnect the assembly.
I say good luck to you on this one. It took me 20 calls to junk yards to just find a headlight assembly. It's being shipped from North Dakota to Wisconsin at this moment and it's costing me $165. These trucks were not mass produced and were only made from 2001 to2005. Parts are hard to find at cheap prices.
what do i have to do to replace the front drive axles on a 2004 ford ecscap???
If it is the same as an 06 there are 3 bolts that hold the Headlight assembly on. One on top and 2 close together on the front close to the grille. Take these out and the assembly comes out so you can get to the cover that goes over the bulb. Check your owners manual for more details.
Using new bolts, torque the front hub/bearing assembly to 96 ft-lbs.....
i have an xj series 2004 jaguar with a broken front headlamp, how do i replace it?
The easiest way is to bring it to a chevy dealer, because the two were companion brands.
how do you take out the front signal lamp on a 2004 range rover