Lift the rear hatch you will see 2 torx screws. Remove the screws and slide out the lens. remove corresponding bulb/socket, replace and reinstall.
The "BRAKE BULB" light means that a brake bulb is not working and may require replacing.
3157LL
Start with replacing the bulb.
most likely a bulb b/c if it was the fuse your other brake and signal light wouldn't work... most vehicles the brake and signal light are all in one bulb... try replacing the light bulb
trying to install bulb in 2007 maxima need info on how to
Your brake light is probably brake fluid low or emergency brake on. Rear brake lights are replaced by removing the lens and replacing the dual filament bulb.
There could be many reasons. The most common reason would probably be that the bulb in the third light has blown. Try replacing it with bulb from one of the other lights or a new bulb and see if it works. If replacing the bulb fixes it, then this was the problem. Otherwise it could be build up of dirt or corrosion in the fitting, or a wiring problem.
There should be a few screws around the housing of the brake light/indicator housing then it is as simple as taking the bulb out and replacing it with the appropriate one.
Push brake light housing toward glass and pop up out of deck. Pull housing toward you and turn sideways. Twist and remove bulb. Replacing is the opposite.
Remove brake light interior trim panels. Then you push and twist the socket for the brake light that needs replacing. Then pull out socket. then pull out bulb from socket and place new bulb in the light socket. Once bulb is installed into light socket. Place the socket where you removed it from brake light housing. Push and twist clockwise to lock back in place. Then replace trim panels.
Chevrolet Astra brake light bulb replacement: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
There are a couple of reasons a 1999 Chevy Silverado third brake light will not work. The first may be that the light bulb is burnt out. If replacing the bulb does not work, there may be loose wires to the connection causing it to not work.