Not a good idea. Install a back board. A backboard of 4' x 4' is of ample size to install the panel and anything
else that needs to be mounted. A thickness of 1/2" is OK but 3/4" is perfect. Some times telephone and cable companies need mounting points and this board is just perfect for this.
yes wires is electrical panel
Electrical wire sheathing should not project more than about one inch into the electric panel.
Siemens bought Gould so a Siemens panel should work.
O course it is very dangerous. Moisture should never ever be allowed near a service panel.
No, you should not install anything in front or below the panel. You must have 36" of free space in front of the panel and 30" on either side of the panel.
Yes, there is no reason why you can not have a utility receptacle mounted to your panel. The most common method is to use a 1/2 inch offset nipple connected to an 1110 pressed utility box.
the main breaker
To keep the current on the neutral to a minimum.
yes wires is electrical panel
B. Electrical panel
Electrical wire sheathing should not project more than about one inch into the electric panel.
Drywall is a panel made of gypsum plaster pressed between two thick sheets of paper. Drywall is a necessity in most building projects. Some examples of drywall equipment are drywall arches, decorative outside corners, celling accents and trays, panels on walls.
Yes, it can cause shorts and corrosion. No moisture should ever be allowed to enter a service panel.
Siemens bought Gould so a Siemens panel should work.
should be behind the dash panel mounted to the underside of the steering column
Depends on the load. Most residential homes require at the very least a 200 amp service panel.
When a large section of your ceiling's drywall is saggy, you need more than a spot repair. Sometimes the problem is so severe that removing an entire 4 X 8-foot drywall panel is the best solution. A few professional hints can make the job of drywall patch repair go more smoothly. Attic insulation should be cleared out Dispose of the old drywall Affix the nails with nail strips Drywall Panels Need to be Screwed In It's time to tape and mud