No
HOW DO I REPLACE WINDOW REGULATOR MOTOR ON PASSENGER SIDE WINDOW
How to remove the window motor from the regulator
You should by a new window regulator , not the motor. take your old motor off the old regulator and replace the old regulator, its off track for a reason, ....Its worn and damaged.AnswerYou should by a new window regulator , not the motor. take your old motor off the old regulator and replace the old regulator, its off track for a reason, ....Its worn and damaged. Kongkit Raggan-Supatanampon
Window motor and regulator are found inside of the door panel and may be bolted or riveted in. Should be bolted. Disconnect the window from regulator, take out reg. and motor, then disconnect regulator from motor, reconnect new motor to regulator, reattach those inside of the door, then reconnect the window to the regulator, put it together and see if it works.
Remove the window regulator assembly from the door.Remove the motor from the regulator by drilling out the attaching rivets with a 3/16 in. drill bit.Connect the window motor to the regulator with 3/16 in. rivets.Install the window regulator assembly.
You have to drill the rivets on the motor separating it from the regulator. The new motor then mounts to the regulator and you insert the new bolts where the riverts were.
how do I replace the passenger side window regulator on an E250, 2006. the window will not release to push to top of window frame only half way?
How to replace a window and regulator on a 1998 checy malibu?
Answer: Yes, they are one unit, once the unit is removed, you can replace the regulator or the motor.
Remove the window regulator and motor from the door as an assembly. Drill out rivets that hold motor to regulator and replace motor. Regulator needs to be riveted back into door for reassembly
remove your door panel there will be three screws holding it on. then you have to remove the screws holding your window to the regulator. then unbolt regulator and motor from door. Undo wiring going to motor.
If you hear a grinding noise when using the power window switch, replace the regulator (motor works); If you hear nothing, then both. Ref: here: http://www.upanddownmainstreet.com/LESRR.html