Stress corrosion cracking is a form of localized corrosion that will affect metal causing sudden cracks. This forms of corrosion is typical of certain combination of metal-environments. For example Stainless Steel will crak in contact with Chloride at temperature above approx 60°C, Copper when in contact with ammonia or Carbon Steel in contact with Caustic Solutions.
Iron and steel rusting is an example of corrosion. Copper pitting or the green patina one sees on copper roofs are also examples of corrosion. Stress Cracking is also considered an example of corrosion.
They are all mechanical stresses. Push is a compressive stress. Pull is a tensile stress and Twist is a type of shear stress.
The over consolidation ratio or OCR is defined as the highest stress experienced divided by the current stress
Nuts and bolts made up of the same metal are preferred because they have the same strength and stress resistance.
The expression for the energy density in terms of stress and strain can be expressed as ρe.
14K SCC likely refers to 14 karat gold coated sterling silver. This indicates that the jewelry piece is made of sterling silver and coated with a layer of 14 karat gold.
A. John Sedriks has written: 'Stress corrosion cracking test methods' -- subject- s -: Testing, Stress corrosion
Stress Corrosion Cracking, a failure which occurs when metals are exposed to stress in a corroding environment.
Stress Corrosion Cracking, a failure which occurs when metals are exposed to stress in a corroding environment.
Galvanic, pitting, concentration cell, intergranular, stress cracking, Uniform etch, crevis corrosion
The minimum concentration of chloride ion required to cause stress corrosion cracking in stainless steel typically ranges from 50 to 100 parts per million (ppm). However, the exact concentration can vary depending on the specific grade of stainless steel and environmental conditions. Monitoring and controlling chloride levels is important in preventing stress corrosion cracking in stainless steel.
Anodic current; temperature; acid; repeated stress (stress corrosion cracking); water; salts especially chlorides; a dissimilar metal placed in direct contact (galvanic corrosion). Poor painting (pinhole corrosion - concentrates all the anodic current in one small place) and others
S. Mat has written: 'Pitting and stress corrosion cracking of stainless steels in sour environments'
Masahiro Saito has written: 'Testing the film-induced cleavage model of stress corrosion cracking'
Iron and steel rusting is an example of corrosion. Copper pitting or the green patina one sees on copper roofs are also examples of corrosion. Stress Cracking is also considered an example of corrosion.
Dale R. McIntyre has written: 'Pyrophoric behavior and combustion of the reactive metals' -- subject(s): Combustion, Metallic oxides, Metals 'Guidelines for preventing stress corrosion cracking in the chemical process industries' -- subject(s): Chemical plants, Corrosion, Equipment and supplies, Stress corrosion
C. T. Fujii has written: 'Stress-corrosion cracking characterization of high-strength steels--base metals and weldments' -- subject(s): Steel, Welded joints, Testing, Corrosion