The conductor for H2 connection on a 480 volt wire transformer should be marked:
orange
all of the above
The identified conductor is white or natural grey in color. If you are using a zip cord (Lamp cord) is is the conductor with the ribs on it.
Grounded conductor is white 120/240 volt & gray 480 volt. Grounding conductor is green or green with yellow.
In house wiring it's typically a bare copper wire. It may occasionally be green.
Colours of magnets can differ, but usually the north pole is marked as red and the south pole is marked as either black or blue.
NEC 230.56 Conductor with higher voltage to ground on a 4 wire delta service should be ORANGE in color. Use orange wire or mark with orange tape at the ends.
an underground conductor can be any color except white, grey or green.
The primarys are marked with the letter H and the secondary terminals are marked with the letter X. The rest depends on how many phases, single transformer, bank transformes, secondary outputs desired, delta or wye or both, etc..... A: most of the time there are not marked with anything. for a power transformer the primary will offer a resistance of 15 ohms the secondary can be more or less depends on applications
black
all of the above
In Europe, the standard color for the protective (earth) conductor is a green/yellow stripe, although in most residential two-core (line and neutral; the protective conductor isn't counted) wiring, the protective conductor is bare.
The identified conductor is white or natural grey in color. If you are using a zip cord (Lamp cord) is is the conductor with the ribs on it.
The grounding conductor is green, green with a yellow tracer or bare copper.
It should be marked on your mini map or the bigger pause screen map, I don't remember the color but the legend of the map should tell you.
Red.
It depends on the electrical standards of the country in which you live. In Europe, for example, the line conductor(not 'phase conductor'!) is brown, the neutral conductor is blue, and the earth conductor* is green/yellow stripe.[*properly called a 'protective conductor']
Grounded conductor is white 120/240 volt & gray 480 volt. Grounding conductor is green or green with yellow.