answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered 2010-05-25 10:39:24

To convert from cubic meters to cubic feet, use this formula:

  • cubic meters x 35.31 = cubic feet
001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Your Answer

Related Questions


Volume of a cylinder in cubic units = piradius2height


Volume of the cylinder = pi*202*50 = 62831.853 cubic cm to 3 decimal places


Formula for calculating the volume of a cylinder = pi*radius2*length giving your answer in cubic units. Therefore: pi*42*9 = 452.3893421 cubic units. To the nearest whole number: 452 cubic units.


You cannot. The amount (mass) of nitrogen in a given volume depends on its pressure and temperature.


Assuming the volume has a base area of the given square kilometers and a depth of the given kilometers, multiply the square kilometers by the kilometers to get the volume in cubic kilometers. Otherwise there is no conversion possible.


Volume of Cylinder = Pi x radius2 x height Therefore for a cylinder with a radius of 5 units and a height of 7 units is given by Volume = 3.14 x 52 x 7 = 549.5 (cubic units)


Volume of Cylinder = Pi x radius2 x height Therefore for a cylinder with a radius of 7 units and a height of 6 units is given by Volume = 3.14 x 72 x 6 = 923.16 (cubic units)


multiply the volume of the cylinder by 1/3. whatever you get is the volume of the cone


Cubic feet represents a volume. Square feet represents an area. There is no conversion between them because they represent different things. However, given solid, with a volume of 1200 cubic feet, if the height of the solid is known, the equation volume divided by height will produce the area of the base of the solid.


The information provided in the question is not sufficient to provide an answer. If the diameter or radius, and the height of the cylinder are given in the same units then if required, first convert diameter to radius: r = diameter/2 units then calculate the volume, V = 2*pi*r2*h cubic units. You will then need to use a conversion site to convert this into gallons using a conversion site.


The soil density must be given to convert from a mass measure to a volume measure.Assuming a clay soil of density 1200 kg/cubic meter, then the volume is 1000/1200 cubic meter or 0.833 cubic meterAssuming a sandy soil of density 1500 kg/cubic meter, then the volume is 1000/15000 cubic meter or 0.667cubic meter


The volume of a cylinder is a product of its length, the square of its radius, and the irrational number pi. The radius is half the diameter, so that the volume of this cylinder in cubic feet is (4)(0.5)2(pi) = about 3.14 cubic feet. There are 27 cubic feet per cubic yard, so that this equals 3.14/27 = about 0.12 cubic yard, where the last digit is depressed because it may not be significant -- there is only a single significant digit given for the dimensions of the cylinder.


Solid volume is measured in cubic units. It is given as cubic kilometer, cubic meter etc.


Volume = pi*r2*h cubic metres where pi is the irrational number approximately 3.14159, r is the radius and h the height, both given in metres.


The cylinder capacity of a car engine - is usually given in cubic centimetres (abbreviated to cc)


Given a cuboid it is always possible to have a cylinder with the same volume.


147π cu.cm or 461.82 cu.cmGiven:Radius = 7 cmheight = 3 cmFormula: Volume of cylinder = pi * radius2 * heightVolume = π * 72 * 3= π * 49 * 3= 147π cubic cmsubstitute π = 3.1416Volume = 147 * 3.1416= 461.82 cubic cm


pi*radius2*height = volume of a cylinder height = volume divided by pi*radius2


The medium density should given to convert from mass (kilogram) to volume (1 cubic meters). Assuming water of 1000 kg/cubic meter, than 1 cubic meter would contain 1000 kilograms,


Make the height the subject of the fornula for the volume or surface area of the cylinder


That of course will depend on their dimensions of which none have been given


Making the unjustified assumption that the height is given in metres, since that makes it a very long cylinder, total surface area = 2178.41 square metres and volume = 7722.79 cubic metres.


It is impossible to answer the question because there are no units given. It makes a huge difference whether the mass is in pounds or grams (or kilograms) and the volume is in cubic inches or cubic centimetres (or cubic metres).It is impossible to answer the question because there are no units given. It makes a huge difference whether the mass is in pounds or grams (or kilograms) and the volume is in cubic inches or cubic centimetres (or cubic metres).It is impossible to answer the question because there are no units given. It makes a huge difference whether the mass is in pounds or grams (or kilograms) and the volume is in cubic inches or cubic centimetres (or cubic metres).It is impossible to answer the question because there are no units given. It makes a huge difference whether the mass is in pounds or grams (or kilograms) and the volume is in cubic inches or cubic centimetres (or cubic metres).


It is impossible to answer the question since there are no units given. Volume of 10 what? The density of gold is 19.3 gcm-3 which may imply that the volume is given in SI units, but that could be cubic metres, cubic centimetres or cubic micrometres.




Copyright ยฉ 2021 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.