Torque as follows 53-63 ft/lbs. in 3 steps
Bolt pattern and torque specs are here: http://toyota.offroadforum.cz/aarc.epnet.com/application/8578/8578R03_Cylinder_Head.html
Torque Value For 1987 R22, Per Haynes Manual - 58 ft lbs.
Torque the head bolt on a 1993 Toyoto 22RE three times at 58 foot pounds of torque. The 22RE head bolts are not torque-to-yield (stretch), and are re-usable. Torque is 55-63 foot pounds. Thoroughly clean the bolts on a wire wheel and inspect for pitting, especially in the threads and replace as necessary. It is also recommended to re-torque them after about 1,000 miles. ChaCha!
torque specs on head gaskets 1988 toyota corolla 4A-F
70
98 toyota tacoma head bolt specs
waths the wey to torque the cylinder head
1991 toyota camry head bolts torque specs
The cylinder head bolt torque specs for a 1972-1979 Toyota 2TC 1600 engine is 64-68 ft lbs.
The torque specs for a Toyota Camry cylinder head is 60 pounds for the inside bolts and 50 pounds for the site bolts. The cylinder head bolts should be tight from and to end alternating.
Tercel EZ