Remove the battery cable, wait 15 seconds, then put it back on and it should erase it off of the ecu
To reset the maintenance required light on a 1999 Acura Integra, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. The maintenance light should turn off, indicating that the reset was successful. If it doesn't reset, repeat the process to ensure it's done correctly.
The maintenance required light only goes on after 7,500 miles since last 'maintenance'. The maintence required light will not turn off by replacing or changing anything, the only way to turn it off is by putting your key in the key slot next to the light.
if you feel underneath the dashboard to the right of the steering column; you will find a button. push and hold it until the light goes off. It is hard to feel, it is probably best to just get down there and look for it. In my 1999 integra it is a little square blue button.
Just hold the trip reset button until the light go off,it will flashe and then come off
HOW TO TURN OFF THE MAINTENANCE LIGHT ON 2002 HONDA ACCOURD
There is a small square button underneath the dash just to the right of the steering collumn. With the key in the ignition, in the off position, press the button for 7-10 seconds, then turn the key to ACC. This should reset the maintenance required light. It is a gimmick to get you to take your vehicle to the dealership so they make money off of you for resetting it.
It means that there is some sort of maintenance required - you'd need to pull codes to determine exactly what. Performing the required maintenance successfully should shut the light off.
What year ?
To turn off the maintenance required light on a 2006 Honda Element, first, turn the ignition to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds. After this, the maintenance light should reset and turn off. If it doesn't, check if the vehicle requires any actual maintenance or consult the owner's manual for further troubleshooting.
To turn off the maintenance required light on a 2008 Honda Element, start by turning the ignition to the "ON" position without starting the engine. Press the gas pedal three times within 5 seconds, and then turn the ignition off. When you turn the ignition back on, the maintenance light should be reset. If it doesn't turn off, repeat the process to ensure it was done correctly.
Did you car just hit a mile marker 50,000 / 100,000 ? "Maintenance required" lights are, for the most part, to protect the manufactor when people do not maintain their car as they should. As long as the "check engine" light is not on,{ this light is important}. Remove the maintenance required lightbulb.
To reset the maintenance required light on a 2013 Lexus ES350, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After that, turn the ignition off, then back on, and the maintenance light should be reset. If successful, the light will no longer be illuminated when you start the vehicle.