There is two ways to convert 112 feet to centimeters. The most common way would be 457.2. This is taught in math.
Can't be done, an square inch is a unit of area while the kilogram is a unit of mass. Unless you could somehow use relativity to convert area into energy, then into mass...I don't think you can do this. Can't be done, an square inch is a unit of area while the kilogram is a unit of mass. Unless you could somehow use relativity to convert area into energy, then into mass...I don't think you can do this.
This question can be simplified: If you only use one unit multiplier, then your answer is simply 180 inches (36 inches in a yard, 5 yards). If you use two unit multipliers, which takes more time, the process by which you get 180 inches is as follows: 12 inches in a foot, times 3 feet in a yard (36 inches) times 5 yards (180 inches). =========================== But the question did specify the method of solution, which should remind us that learning the method is more important than the answer to little problems like this one. A "unit multiplier" is a fraction with equal numerator and denominator, which is therefore equal to ' 1 ', and you can multiply a measurement by it without changing the value of the measurement. Each of the fractions in the following procedure is equal to ' 1 ': (5 yards) x ( 3 feet/yard ) x (12 inches/foot) = 180 inches
Use this equation to convert degrees Fahrenheit (ºF) to degrees Celsius/Centigrade (ºC): [°C] = ([°F] - 32) × 0.556
Well, the only time you'd use this is in displacement of an irregular solid to find its density. In that case, if a liquid got displaced 200ml, you can convert it to cm3 like this: 200ml=200cm3
You can't convert a distance unit to a time unit. If this is for a speed problem, you would have to know the speed; in this case, use the formula: distance = speed x time.
There are two ways to convert this problem. The answer to this would be 457.2.
Why would you want to use three unit multipliers when the single multiplier: 3.2808 does the trick?
I would use 1/36 to convert inches to yards and 1/1760 to convert yards to miles.
meters to centimeters x100 centimeters to inches /2.54 inches to feet /12
You might convert 3 gallons to pints with two unit multipliers if you knew that there are 4 quarts in 1 gallon, and 2 pints in 1 quart. It could look like this: 3 gallons x (4 quarts/1 gallon) x (2 pints/1 quart) = 3 x (4/1) x (2/1) pints = 24 pints
1 km = 1000 metres. Therefore 60 sq km = 60 km*km = 60 *1000 m *1000 m = 60 million sq metres.
cu. yards x 27 ( cu. ft. per cu. yd ) x 12x12x12 ( cu. inches per cu. foot ) Thus, 40 x 3x3x3 x 12x12x12 =
If you need to memorize certain relationships between metric and American measurements, one of the most commonly needed is 1 inch equals 2.54 cm. A foot equals 12 inches. So multiply 35 feet by 12 inches. Then multiply the result by 2.54 centimeters per inch. This type of process keeps us from having to memorize hundreds of detailed unit multipliers, or looking them up in a book every time.
Turn the multipliers upside down !
A conversion factor
100
Don't you know how to use unit multipliers?! GOSH!!