Consumer Electronics
Inventions
Electronics Engineering

Uses of transistor?

001

Top Answer
User Avatar
Wiki User
Answered
2012-11-22 12:37:12
2012-11-22 12:37:12

semi-conductor device that capable in amplification.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


The main difference is that a PNP transistor uses "holes" as carriers and an NPN transistor uses electrons as carriers (It is to be remembered that the flow of current is always in the direction opposite to that of the flow of electrons).

A transistor is a solid state electronic device that replaced vacuum tubes for most uses.

Metal Oxide Semiconductor. Usually used when referring to a specific type of transistor which uses this type of semiconductor material: the Field Effect Transistor (FET).

The "ordinary" transistor is bipolar because it uses both P-type and N-type semiconductor, i.e. PNP or NPN.

A Darlington pair uses two transistors connected to behave as a single transistor with a very high current gain (beta). Transistor-1 has its collector connected to the collector of transistor-2. Transistor-1 has its emitter connected to the base of transistor-2. The base of transistor-1 with the emitter and collector of transistor-2 is used as a single transistor.

The correct spelling is transistor. The definition of transistor is a portable radio that uses circuits that contain transistors instead of vacuum tubes. It is a semiconductor device that has three connections.

the transistor is called as transistor because there is transfer of resistance from input to output .transfer resistance so it is transistor.

Transistor-transistor logic (TTL) is a class of digital circuits built from bipolar junction transistors (BJT) and resistors. It is called transistor-transistor logic because both the logic gating function and the amplifying function are done by transistors.To know about the advantages of TTL logic family, one should have a basic idea about RTL, DTL etc. Diode logic (DL) uses diodes to implement logical functions like AND and OR. But the disadvantage is that it can not perform NOT operation. As AND and OR are not complete functions by themselves, they can not perform several logic functions without NOT. Hence, there was a need for some device which can perform a NOT function as diodes can not. That device is a transistor. Then came the DTL which uses a transistor along with diodes. As a transistor can act as an inverter, NAND (NOT-AND) & NOR (NOT-OR) operations can be performed. But this logic uses several diodes which will slow down its operation. Due to the delay offered by them, the logic levels may sometimes change i. e. 0 t0 1 or 1 to 0. Then came TTL. This logic uses a multi emitter transistor, a transistor with many emitter terminals. As every emitter is nothing but a diode, this logic eliminates the use of all diodes. This is the major advantage. As transistor becomes ON and OFF much rapidly than a diode, switching time will be faster.TTL, or Transistor-transistor logic replaced resistor-transistor logic, and used much less power. The TTL family is very fast and reliable, and newer faster, less power-consuming, etc. types are always being developed.ANSWER: ONE WORD SPEED

A silicon transistor is a transistor made of silicon.

Because it uses N-type and P-type semiconductor, usually silicon.The construction will either be NPN or PNP, with the different types in a "sandwich" construction.

What is a 2N2369 transistor.It's an npn switching transistor.

I can give you several sentences.I bought a transistor radio.The transistor amplified the signal.We studied the transistor in science class.

what is load line of transistor what is load line of transistor

A Unijunction Transistor is a transistor that acts solely as a switch.

what is the similar transistor to ut5352?(t803800w)

a transistor that is not active

how does a transistor behaviour

TFT is an acronym for Thin Film Transistor. This is a type of LCD (Liquid Crystal Display) screen which uses thin-film transistor (TFT) technology to improve image quality.

Power transistor can conduct large amount of currents through it, more than small signal transistor. power transistor has a vertical structure and small signal transistor has horizontal structure.In power transistor quasi saturation region is present which is absent in the small signal transistor. In power transistor there is a inculsion of drift layer which is not there in the small signal transistor. Power dissipation is less in power transistor and it is more in small signal transistor. b.v.polytechnic,vasai pushkar vaity.

The active region of a transistor is when the transistor has sufficient base current to turn the transistor on and for a larger current to flow from emitter to collector. This is the region where the transistor is on and fully operating.

I believe that is resistor transistor technology TTL transistor transistor logic

It depends on the transistor, you just have to look at the data sheet for the transistor.

To know about the advantages of TTL logic family, one should have a basic idea about RTL, DTL etc. Diode logic (DL) uses diodes to implement logical functions like AND and OR. But the disadvantage is that it can not perform NOT operation. As AND and OR are not complete functions by themselves, they can not perform several logic functions without NOT. Hence, there was a need for some device which can perform a NOT function as diodes can not. That device is a transistor. Then came the DTL which uses a transistor along with diodes. As a transistor can act as an inverter, NAND (NOT-AND) & NOR (NOT-OR) operations can be performed. But this logic uses several diodes which will slow down its operation. Due to the delay offered by them, the logic levels may sometimes change i. e. 0 t0 1 or 1 to 0. Then came TTL. This logic uses a multi emitter transistor, a transistor with many emitter terminals. As every emitter is nothing but a diode, this logic eliminates the use of all diodes. This is the major advantage. As transistor becomes ON and OFF much rapidly than a diode, switching time will be faster. TTL, or Transistor-transistor logic replaced resistor-transistor logic, and used much less power. The TTL family is very fast and reliable, and newer faster, less power-consuming, etc. types are always being developed. = In TTL (Transistor-Transistor Logic), think that the device using this technology is made from several transistors. Another advantage is that many more chips employ this technology.

It is the middle portion of the transistor


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.