It means that data is split up among 2 or more hard disks, WITHOUT fault tolerance. This increases data transfer speed, but unlike other types of RAID, since more than one hard disk is used, it will INCREASE the risk for the data, in case something happens to the hard disks.
Raid 0 divides the information onto 2 or more hard drives speeding up reading and writhing exponentially.
If one drive fails all the information is gone.
There are at least two cases when you can benefit using one of RAID configurations. The first case is when you need to have high transfer rates: RAID 0 (gaming, video editing and so on). The second case is when you need a very stable system which can stand loose one of hard drives: RAID 1 (servers, file storage and so on).
stephen decatur
Air Raid.......
Chaseabout Raid happened in 1565.
Air Raid Precautions
RAID 0 does not provide any fault tolerance.
Windows XP supports spanned and striped RAID 0 volumes Hardware RAID is considered a better solution for fault tolerance than software RAID RAID 0 does not provide fault tolerance
RAID 0.
Every RAID level stripes data across multiple drives, which improves performance compared to using a single disk. RAID 0, RAID 1, RAID 1+0, RAID 5, RAID 6, etc. all have better performance than a single disk. Other than RAID 0, all other RAID levels provide fault tolerance. RAID 1, RAID 1+0, RAID 5, RAID 6, etc. all have fault tolerance.
RAID 1, RAID 1 + 0, and RAID 5, 6.
Raid 0 dad recovery is for emergency use on computer services. When data is corrupted or damaged, Raid 0 Data recovery can help by offering speedy recovery of data or files.
raid 0
RAID 1, RAID 0+1, RAID 5 and 6.
Hardware RAID 0 is basically a controller card that controls the RAID functions such as a SCSI RAID config. Some motherboards come with RAID functionality built in the motherboard. If you have a RAID adapter in your computer and want a RAID 0 configuration with no data protection. You must download software from the RAID adapter manufacture, usually a bootable CD and run the configuration program at boot up using the CD. Keep in mind that this procedure will destroy any data on the drives. Listed below is a list of abbreviated possible configuration types. Raid 0 - No data protection Raid 1 - One drive mirrored to another Raid 5 - Multiple drives combined together with data protection. Make sure you backup your data first...
Different RAID systems have different effects on multiple hard drives. RAID 0 combines storage together. Say you have 2 250GB HDDs combined with RAID 0: that you gives you, essentially, 500GB of storage. The problem with RAID 0 is that if one of the drives were to fail, then the other is to fail too, because of the way RAID 0 works by distributing strands of data over both disks. RAID 0 is sometimes not considered to be a true RAID system because of the lack of fault tolerance. RAID 1 and 5 are more complex to describe, but they generally deal with the same thing: backups. Instead of combining storage, RAID 1 and 5 deal with clones of a particular drive to offer redundancy if one were to fail. Say you have 2 250GB HDDs under RAID 1, essentially giving you 250GB of storage. If one drive were to fail, then the other would serve as a replacement if such were to occur.
RAID 0 can be used to improve performance through concurrent access and/or create large logical disks out of multiple physical disks.
RAID 0 is generally the fastest RAID level. It uses two hard drives at the same time, with each drive sending and receiving different data. The data is usually "striped."