Want this question answered?
maderchod
It doesn't really matter which way around you use a transformer, the primary winding is ALWAYS whichever winding you connect to the supply, and the secondary winding is ALWAYS whichever winding you connect to the load. For either connection, the turns ratio will ALWAYS equal the voltage ratio for an ideal transformer (or close enough for a real transformer).
the auto transformer is the one winding transformer. it ismaily used in practical purpose.
Yes, you can use a mutual (2-winding) transformer as an autotransformer, by connecting the two windings in series. For example, if you have a 240:120 V transformer, connecting the two windings in series and supplying the 240-V winding with 240 V can give you a secondary voltage of 360 V. But you must take into account the polarity of the transformer, and realise its capacity will change.
to cool a winding of transformer and it is a insulating material and transformer oil is a purifing oil
For a step-down transformer, its secondary winding will be the LV winding. For a step-up transformer, its primary winding will be its LV winding.
Injecting power into the higher voltage winding of a transformer will make it act as a step down transformer; injecting power into the lower voltage winding will make it act as a step up transformer. A transformer can be used both ways.
It depends on the rated voltage of the transformer winding -are you talking about a 12-V transformer winding or a 400-kV transformer winding? Obviously, there is no one answer to your question!
A winding is the name given each of the coils wound around the transformer's core. A basic transformer has two windings, termed the primary winding (connected to the supply) and the secondary winding (connected to the load).
maderchod
You need two windings because that is the purpose of the transformer - to convert one voltage into another. If there were only one winding, it would be an inductor, or a special case called an autotransformer, but that is still "sort of" two windings.AnswerThe major advantage of a two-winding transformer (a 'mutual transformer') over a single-winding transformer (an 'autotransformer') is that a two-winding transformer provides electrical isolation between the secondary and primary circuits. This is very important for safety reasons and there are many circumstances in which the use of an autotransformer is not permitted.
The primary winding of a transformer is connected to the supply, while the secondary winding is connected to the load.
It doesn't really matter which way around you use a transformer, the primary winding is ALWAYS whichever winding you connect to the supply, and the secondary winding is ALWAYS whichever winding you connect to the load. For either connection, the turns ratio will ALWAYS equal the voltage ratio for an ideal transformer (or close enough for a real transformer).
the auto transformer is the one winding transformer. it ismaily used in practical purpose.
The terms, 'primary' and 'secondary', describe how a transformer is connected and his nothing to do with which is the lower- and higher-voltage winding.The primary winding is the winding connected to the supply, while the secondary winding is the winding connected to the load. So, for astep-up transformer, the secondary winding is the higher voltage winding, whereas for a step-down transformer, the secondary winding is the lower voltage winding.For a loaded transformer, i.e. a transformer whose secondary is supplying a load, the higher-voltage winding carries the smaller current, while the lower-voltage winding carries the higher current.
How do you Winding of inverter 100 watt transformer?Read more: How_do_you_Winding_of_inverter_100_watt_transformer
Shielded transformer