According to the manual, the specifications are the following: 25-34 lb/ft on the flex plate to torque converter, 23-39 lb/ft on the automatic mounting bolt, and 89 lb/ft on the manual mounting bolt.
25
89ft/pounds
Torque to 95 foot pounds with thread locking compound.
depends on the engine size the 4.6 flywheel to crank is 62lbs and pressure plate to flywheel is 18lbs
For a 1.0 litre and manual tranny it's 55 ft.lbs
if it is diesel engine 25 foot pounds
i need the head torque settings for peugeot 1.9 diesel motor
the correct torque for cylinder head bolt of kia pregio 2.7 diesel is 130-135ft-lbs.
What are the head bolt torque specs for a mazda mx3 1600
Head Bolt Torque Specs for1995 Suzuki Savage Ls650ps
Don't bother with torque specs, rust and worn bolts can make the torque innacurate. Just make nicely tight with one hand on wrench (DO NOT STRIP, A 12-POINT BOXED END WRENCH IS GOOD ENOUGH). You can also put anti-seize on bolts (only a little)... you never know if you will be the next person that has to remove them.
Flywheel Torque 61-69 Foot pounds