0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Some more difference between single collision domain and broadcast domain?
A collision domain is a logical network segment where data packets can "collide" with one another for being sent on a shared medium, in particular in the Ethernet networking protocol. This is an Ethernet term used to describe a network scenario wherein one particular device sends a packet on a network segment, forcing every other device on that same segment to pay attention to it. A broadcast domain is a logical network segment in which any computer or other device connected to the network can directly transmit to any other on the domain without having to go through a routing device, provided that they share the same subnet address and are in the same VLAN, default or installed. More specifically, a broadcast domain is the area of the computer network composed of all the computers and networking devices that can be reached by sending a frame to the data link layer broadcast address. A very basic network that uses hubs rather than switches or routers is like a post office clerk checking the mail. One clerk looks at each letter to confirm that the mail is not for themselves.
How did YouTube get its name?
"Broadcast yourself" YOU - yourself TUBE - where you broadcast.
What is the definition of a FTP host in computer science?
FTP hosts are a server on the internet that people can access with an FTP client. It allows users to easily exchange data over a fundamental network protocol.
The organism from which a parasite obtains nutritional needs is called?
The organism from which a parasite obtains nutritional needs is called a host. The host is a food source and a home for the parasite.
What compound word for broad?
Broadcast, Broadway, Broadband and Abroad.
What is the host id of this IP address of 131.107.2.200?
Since this is a class C network address, the host id is 24, the network id is 201.123.87.0
Which address in a network cannot be assigned to hosts?
The general rule in networking is that the network id cannot be all zeroes or all ones, and the host id cannot be all zeroes or all ones. The all zero address results in a reserved address meaning "this network". The all ones address is a broadcast address, and cannot be assigned to a single system.
What is the difference between host id and net id?
An identifier for a host. A host ID uniquely identifies a host within an address family on a network but does not identify the network. A host ID is not necessarily sufficient to establish communications with a host. foe example:- In a class C IP address say, 192.52.56.8 the first 3 octets denote the net ID while the last octet shows the host ID.
What is the network ID and what is the host id of ip address 110.10.10.1?
Assuming that this is a Class A network (Class A Networks range from 1-127) the default subnet masked is 255.0.0.0. Therefore the network ID would be 110.0.0.0 and the host ID would be x.10.10.1
How many host can you have for 10.20.50.0 subnet mask 255.255.255.0?
253. Valid addresses would be from 10.20.50.1 to 10.20.50.254 10.20.50.0 is the network address. 10.20.50.255 is the network broadcast address. Any network with a subnet mask of 255.255.255.0 will support 253 hosts.
Calculating network host and broadcast address?
To calculate Network address you should assign "0" " Zero" for Host portionEx. 192.168.157.6/24Since the above IP is Class C last Octet will be the host partThis will be shown in binary as11000000.10101000.10011101.00000110.00000000Then Network address will be 192.168.157.0To find the broadcast IP you need to add "1" Once for host partIf we take Same IP11000000.10101000.10011101.00000110.11111111The Broadcast IP will be 192.168.157.255
How will a broadcast frame that is sent by a host PC be handled on the net?
The broadcast will be received by all devices in the same network, but will not be forwarded outside the network (routers do not forward broadcast messages). So for the Internet, for example, you do not see broadcast packets.
Which class of id address provide a maximum of only 254 host addresses per network id?
Class C network
Why does a network host need to broadcast an ARP request?
A host on a network needs to broadcast an ARP request to advertise its Mac address. The networking world is very chatty in nature and when a new network host is available it immediately broadcasts its Mac address as with a ARP message. Also when a particular network host needs to send a data packet to another network host available in the same LAN whose Mac address is unknown, the first network host sends out a ARP message requesting for the destination network hosts MAC address.
What is network id host id?
Network IDA network ID refers to a part of a TCP/IP address that is used to identify the subnet that a host may be on. The subnet that the computer is on is determined by the netmask and IP address of the computer. This subnet address is the same as the network ID and is the beginning part of the computers IP address.When the netmask is setup, it is a number where some of the most significant bits have a 1's value and the rest have values of 0. The most significant part of the netmask with bits set to 1's specifies the network address, and the lower part of the address will specify the host address.The part of the IP address that matches the part of the netmask where the bits are set to ones determines the network ID.
What is message broadcast?
That means the message is sent, not to a single host, but to all hosts on a network. (A host may be a computer, or other communicating device.)
What defines the part of an IP address that is the host ID and the part that is the network ID?
A subnet mask is used for this purpose.
