I think there made from rubber.
There was buttons on the tv box itself
Select "TV" and the "Play" buttons on the sky remote.
If the channel buttons on your Dish remote are not working after programming it to your Sanyo TV, it could be due to an incorrect programming procedure or a mismatch in the remote control settings. Ensure that the remote is properly synced to the TV by following the correct code entry process. Additionally, check if the remote is set to the TV mode instead of the satellite mode. If the issue persists, resetting the remote and reprogramming it may help resolve the problem.
They are made of Silicone rubber.
If you cannot find your remote to your TV, I would suggest that you could get up and turn off the TV with the buttons on the side, front, or underneath, the TV.
its long and gray with white buttons and it has 1 red button
Every TV manufacturer that I'm aware, has buttons on the front of the set which will duplicate the functions of the remote control. You could probably start with the `menu' button and then take it from there. But that is not true at least with with Sony Trinitron. The only buttons are "demo", "tv/video", "volume", "channel", "power".
Depending upon the remote, our remotes have either a TV/Video, TV/Video/Input, or Input buttons. This button will cycle through the inputs on your TV when the remote is programmed to control the TV.
I would advise you to search for the television manual, or something like that, You will be most likely to find the picture of your remote control for the given TV. Other than that, just press buttons on the remotes until the TV responds. You should mark the remote afterwards, though.
If you are adding a pop up cabinet for your television, a remote will be very handy. If you do not want a remote you can simply store it in a drawer and use the manual buttons located on the cabinet itself.
the television has changed because it used to be a box and now it is a flat screen or on legs and has a remote instead of buttons on the side.
If you have Verizon send you the new model remote (with only 2 buttons at the top), the 922 code search using the FF button on the remote will find a code that works. The old remotes with the 4 buttons at the top didn't find a code, even if you hit the button all 200 times. Ordering the new remote worked for me.