A luminous flame is blue and is air/oxygen rich and occurs when the Bunsen vent is open. A non-luminous falme is very yellow and smoky and is fuel rich. It occurs when the Bunsen vent is closed.
It is orange in colour, its flame is not very hot, it wavers and is unsteady, and it produces carbon in the form of soot.
A luminous flame with a Bunsen burner is caused by incomplete combustion due to a lack of oxygen provided by the air valve. The yellow color is from the burning of carbon particles (soot).
Luminous since it is visible
I'm only in Yr 7 and i know,anyways the characteristics are what it contains a safety flame is when the flem is on and orangey colour and is not as hot as the blue flame.For example you are using a Bunsen burner (you gotta have used a Bunsen burner at least once at scholl cause i have,any ways the blue flame is always hotter than the orangey flame (the safety flame) because to make a blue flame you need to open the Bunsen burner jacket to let oxygen pass through.Sp the characteristics are that the safety flem is an orangey cour as oppsed o the blue flame,which is also much hotter than the safety flame.
It is less hotter than non luminous flame. Used for lighting only It produces soot that makes apparatus sooty
the yellow/safety flame - thats the one that burns less the blue flame - burns THE ROARING FLAME - that one burns a lot and you can tell the difference from the blue flame because it makes a roaring sound
The blue flame of a Bunsen burner has a temperature between 500 0C and 700 0C.
.
The blue flame is used because it is the hottest.
You think probable to the luminous flame.
For a Bunsen burner the lowest temperature is in the extreme lower part of the flame.
The two types of flames a Bunsen burner can produce are a luminous, yellow flame and a "roaring" blue flame. The blue flame is much hotter than the yellow flame.
NaCl will burn with a brick-red colour in a non-luminous Bunsen flame.
The yellow flame (or luminous flame) should not be used because 1. It is less hot that the blue flame (or non-luminous flame) 2. It produces soot, as compared to the blue flame which is the clean flame
Rotating the barrel of the burner.
It is a luminous yellow flame. 🔥
The flame is white and very luminous.
The two types of flames a Bunsen burner can produce are a luminous, yellow flame and a "roaring" blue flame. The blue flame is much hotter than the yellow flame.
Non-luminous flame should be used for heating in the laboratory because the flame is steady and produce little or no soot.Non-luminous flame is very hot thus, it is recommendable to use for laboratory purposes.Luminous flame is unsteady while non-luminous flame is steady.Another reason of using non-luminous flame because the flame of non-luminous is blue, and not visible unlike the luminous flame which is yellow in colour and visible.