notch is the device used for the measurement of the rate of flow of liquids through small channels at tanks where as orifice is used to measure rate of flow through pipes
difference between square and cube
Nothing, they are the same.
The differences between arithmetic and geometric mean you can find in the following link: "Calculation of the geometric mean of two numbers". Cheers ebs
You can find the differences between arithmetic and geometric mean in the following link: "Calculation of the geometric mean of two numbers". Cheers ebs
explain the differences between a point and a line and a plant
Synonyms for the word orifice are hole, aperture, opening, vent, pipe, mouth, gape, crack, cranny, crevice, recess, rift, notch, blank, arroyo, chasm, canyon.
Normally the location of the notch on the pin side.
The orifice tube is located between the engine and the fire wall. The windshield wiper cowling has to be removed to gain access to the orifice tube.
The jugular notch, or suprasternal notch, is in line with/at the level of the intervertebral junction between the second and third thoracic vertebra (between T2 & T3).
Stomach has 2 opening. - cardiac orifice opening of oesophagus into stomach - pyloric orifice opening between stomach and small intestine
JJLLL
Differences between the PC7C and PC7X head, there are some major differences between the two heads, one happens to be the width; the PC7X head is approximately ¼ of an inch wider; and that there are also one way oil valve/orifice hole on the PC7C head that is not on the PC7X version also the head guides on the engine are different. These two heads are not interchangeable first due to the differences in width and second due the way oil is channeled through the engine.
between pelvic bones
The orifice sits between the gas fitting and the evaporator, taking it apart may be the only way to clear the obstruction, but its a closed system, there isn't anything in there big enough to block the orifice.
monus pubis
An orifice is a hole (as in "anus orifice"). A propane orifice could be created using brass. Consult your local professional.
Many of the GM vehicles have the AC orifice inside the condenser fitting that goes between the condenser and the cabin.