0
Well the output of any oven should be Heat (thermal energy), with exhaust fumes and gases as (unwanted) secondary outputs occurring in most designs.
And the input can be any sort of fuel to produce said heat, depending on the oven. Most commonly, the input of an oven is electricity, gas, oil or wood.
What else can I help you with?
Is an oven an input or output device?
Input
What is the input and output of an alarm?
the inputs are the sensors that detect intrusion, the outputs are the siren and the lights
What holds processed information before it is output?
An electronic tool that allows information to be inputs process and output is called?
What is reverse enginnering?
First we need to set our output gole (Corresponding requirement) based on that we'll come to inputs.
What are high speed input output devices?
Input and output devices are similar in operation but perform opposite functions. It is through the use of these devices that the computer is able to communicate with the outside world. Input data may be in any one of three forms: Manual inputs from a keyboard or console Analog inputs from instruments or sensors Inputs from a source on or in which data has previously been stored in a form intelligible to the computer
How do you measure productivity?
Partial measures output/(single input)Multi-factor measures output/(multiple inputs)Total measure output/ (total inputs)Productivity =(Outputs/inputs)
Introduction multiplexer demultiplexer?
A multiplexer, commonly referred as an input selector, is a circuit with many inputs but only one output: it has some data inputs, control inputs and one output, depending on the control inputs, one input from the data inputs is sent to the output .A demultiplexer is a circuit with one data input, few control inputs and many outputs, it is also known as output selector.
What are the inputs of a oven?
The input of a cooker is when you turn the cooker
Products resulting from inputs and conversion are known as?
output
When is the output of AND gate HIGH?
When all inputs are HIGH.
There is a circuit using there nand gates with two inputs and one output find the output?
A "Nand" gate is an "And" gate with an "Inverter" added to its output. To get a logic 1 output from a "Nand" gate, you need a logic 0 on both of its inputs. If I understand your question correctly, you have three "Nand" gates. Presumably the outputs of two of them are connected to the inputs of the third. Logic 1 at both inputs of the first two "Nand" gates will produce a logic 0 output from both of them. The two logic 0's are fed to the inputs of the third "Nand" gate producing a logic 0 output from the third "Nand" gate.
Op-amp working principle characteristics?
1.You can see that A and B are inputs and C is the output. Whenever two inputs are given , the output is the difference of the inputs. So it is called as Operational Amplifier. 2.When one input is one or Inverting or minus and the other being plus, then the output will be negative.
What does NAND stand for?
NAND stands for 'Not And', which means the output will send a signal so long as both inputs aren't on. (If both inputs A and B are 1, then the output is 0. All other combinations give an output of 1)
Is the increase in efficiency gained by producing more output without using more inputs?
savings
Is a sensor a input output?
It is an input, sensors are always inputs.
What is the ratio of total output to a weighted average of inputs?
hibklu
What is a xor gate?
An XOR gate is an Exclusive OR gate. The output is 1 if either one or the other inputs are 1. but remains at 0 if both inputs are 1.A normal OR gate will output 1 if both inputs or either is at 1.XOR means exclusivly OR, one or the other but not both.
