1 place the scale in contact with the object along its length starting from 0. if the zero mark is not clear use any other full mark of the scale.
2 your eye must be exactly in front of the point where the measurement is to be taken.
Ones eyes should be vertically above the meter rule.
the meter rule should be placed against the object.
make sure wear and tear is not present
There are many different kinds of radiation and the appropriate safety precautions are different for the different kinds. The precautions for using microwave radiation, for example are very different from the precautions for using gamma radiation, or infra red radiation.
There are several different kinds of radiation and the appropriate precautions are different for each kind.
dont touch it :)
be careful!!
newton meter
1. Use the meter in its rated range. 2. Connect it in series to measure the current.
What's the function of meter rule
No particular precautions have been reported as being necessary in using cyperus.
No necessary precautions to observe in the diet.
Two methods: 1. mark a point on the circumference of the round object; put a mark on the floor; line up the marks and roll the object along the floor until the mark retouches the floor; use the meter rule to find the distance between the marks on the floor. 2. measure the diameter of the round object using the meter rule and multiply it by π (pi ≈ 3.14159)
There are many different kinds of radiation and the appropriate safety precautions are different for the different kinds. The precautions for using microwave radiation, for example are very different from the precautions for using gamma radiation, or infra red radiation.
no
If you have calibrated eyeballs
When you are using a breaker there are many safety precautions you can make. You will want to wear safety gloves and a lab apron.
0.5mm
If the calibration starts from the edge of the stick then it is a meter rule Basically "0" starting from the edge And if it is a meter ruler ,there is like half inch of empty space before 0
0.5