Want this question answered?
stik a thermometer in to a girls private when they have their period
it is because they were consistent at melting and boiling point
The steps for calibrating a piece of equipment generally compare your apparatus against some reference standard.Consider calibrating a stopwatch. You may calibrate this against radio supplied time signals, some for a short period, some for a 1 hour period. And repeat the measurements several times, and ignore any measurement that appears out of range when compared with all the rest.Sometimes there are such aids as standard solutions or materials, from authoritative suppliers as a standards laboratory. Or calibrated sets of masses, certified by a standards lab.Make sure the comparisons are made under appropriate repeatable conditions of altitude, heat, and so on for other environmental variables.
procedures
state 2 procedures should be used to properly handle a light microscope
The cast of The Shadowgraph Message - 1913 includes: Harry Keenan as Texas Evelyn Selbie Brinsley Shaw as Dan Morgan Harry Todd as Yuma
The cast of The Shadowgraph Message - 1915 includes: Walter Edwards as Howard Ward Arthur Maude Thelma Salter as Hilda Ward - the Daughter Margaret Thompson as Jean Cordova
compass needs to be recalibrated
Test
Calibrating micrometers: For quick reference the supplied test piece can be used. For calibrating a micrometer, gauge blocks are used.
marking on the thermometer . its usually divided by 100
to obtain more accurate readings
When calibrating any kind of thermometer in an ice water bath, the temperature should be 0o C or 32o F.
It is calibrating.
Set the delay timers
While compound correlation is the correlation found by calibrating the Gaussian copula model to the price of a CDO tranche (for example 3-6%), base correlation is found by calibrating to the price of a first loss tranche, i.e. to the sum of all tranches up to an attachment point (for example 0-6%, the sum of 0-3% and 3-6%). The curve of correlations obtained by calibrating to first loss tranches turns out to be much smoother and more stable than that obtained by calibrating to plain tranches.
How can I calibrate a micrometer without the use of gage blocks. Any adjustments on the device?