Want this question answered?
You can program without having the codes by following these steps: 1. Turn on the TV (or other device). 2. Press and hold CODE SEARCH until light stays lit; release. 3. Press TV button. 4. Press POWER button repeatedly until TV turns off. 5. Press Enter. Repeat for each device. These instructions are found on the inside of the battery cover.
i need to progra a rca system blink 4 remote to my westinghouse tv how do i do this
Here are some codes I found online but none seem to work for my remote. Codes for Magnavox TV when using RCA Universal Remote: 006,007,010,011,013,016,027,033,035,043,066,087,089
A code for a universal remote control ge for a Berkshire tv
There are 4 codes available for an Element TV. They are listed below! Codes: 627, 251, 654, 659
S-video, rca and composite are all methods of transfering video from device to device. RCA uses two contacts, s-video uses 4 or 7 composite uses 6 http://en.wikipedia.org/wiki/S-Video The S-cable will produce a slightly better picture if the TV is good enough.
The code is 4 8 15 16 23 42.
The lamp is usually located on the lower left or right side of the housing. Each model of TV is different, so have a look around the TV for a square hatch, about 4 inches by 4 inches. There should be 1 or 2 screws holding it in place.
Go on either the Disney website or keep your eyes peeled for the cheat codes on Disney Channel. The codes appear in a star at the bottom of your television screen every day, so just watch out for those codes!
There are many different versions of the Vizio TV so to program your one 4 all remote try the following codes, three digit remote codes; 502, 627, 004, 113, 505 or 011. Four digit remote codes; 1758, 0178,1756, 0128, 0117, 1017, 1078, 0030, 0056, 0205 or 1292. Five digit remote codes; 10178, 10117, 11756, 11758, 01377, 10885, 10864 or 10120.
Depending upon the type receiver you have, 3 options are available for connecting the receiver to your TV. With the VIP 211, 211k, 222, 612 receivers, you can use a coax, RCA, component or HDMI cable to connect to your TV; HDMI giving you the highest quality picture if you have HD programming. The VIP 222k, 622, 722, 722k, and 922 receivers allow you to use RCA, component or HDMI cable (K series receivers and 922 have a coax port with OTA module installed). All other receivers can use the coax or RCA cables. Connect the type cable you have from your receiver to your TV. If you are using a coax cable, place your TV on channel 3 or 4. Any other type cable, you place your TV on an Input setting - HDMI for HDMI cable; comp for component cable; or Vid, AV, etc. for RCA cable.
See the link below to download the PDF with instructions and codes. Be careful! Many remotes look similar. For me what worked was "0000" -- my remote accepts 4-digit codes, not 5-digit codes.