Best Answer

The older brownings use an asterisk (*) or a set of them to determine the choke of the barrel. (one) * is Full, (Two) ** is Modified, and (three) *** is improved cylinder. This marking is usually located on the side of the barrel along the same line as the mfg's name. More complete answer BROWNING CHOKES AND THEIR CODES (ON REAR LEFT-SIDE OF BARREL) '*' designates full choke (F). '*-' designates improved modified choke (IM). '**' designates modified choke (M). '**-' designates improved cylinder choke (IC). '**$' designates skeet (SK). '***' designates cylinder bore (CYL).

🙏

🤨

😮

Study guides

Q: What are the various choke markings for Browning shotguns?

Write your answer...

Submit

Related questions

Choke markings , lets see , Chokemarkings , and Prints of Markings :D

The fixed choke markings are denoted by * marks on the bottom of the barrel under the forearm assembly. 3 on the left barrel and 4 on the right. *** Modified choke **** Improved Cylinder

Contact Browning.

Depends on how choke markings on the weapon.

On the choke tubes. It is marked by lines on the front edge of the choke. The more lines the more open the choke. 1 line is a full and goes from there. If it doesn't have tubes, on the inside of the receiver near the bbls.

Check on the barrel flats

on a single shot barrel you must remove the barrel and look at the flat side underneath the chamber to see the choke stamping.

We are not familiar with a model 22, but all Browning Shotguns use the invector screw in choke tubes. These are available at most Gun Shops and retailers of Browning guns. You can also find them online at the Browning Co Website

Browning Choke Markings "* " = full "*- " = improved modified "** " = modified "**-" = improved cylinder "**$" = skeet "***" = cylinder

one star or (*) means Full two (**) Improved Modified three (***) Modified Four (****) Improved Cyl.

I don't think there is an invector plus model. Invector Plus is the choke system Browning uses on newer shotguns.

No.None of the browning auto-5 shotguns left the factory with a adjustable choke.This was a after market add-on.

Haven't seen that marking. Choke markings on Browning shotguns are coded by a series of asterisks and dashes. They also had a marking called 'ACIER SPECIAL' which simply means special steel, indicating the gun was suitable for smokeless powder.

BROWNING CHOKES AND THEIR CODES (ON REAR LEFT-SIDE OF BARREL)* designates full choke (F).*- designates improved modified choke (IM).** designates modified choke (M).**- designates improved cylinder choke (IC).**$ designates skeet (SK).*** designates cylinder bore (CYL).INV. designates barrel is threaded for Browning Invector choke tube system.INV. PLUS designates back-bored barrels

Depends on what they are. Could be choke markings, proof mark, etc..

1965 if it is an auto-5. There should be markings on barrel to indicate choke.

They identify which chokes you have in without having to use a choke tool. different companies have different markings but in general the fewer marks, the more constricted the choke (1 mark=full choke).

Barrel marking include the proof marks, choke code and weight of the barrels. Please be specific and we can give a more direct answer.

open = 5 notches 1/4 = 4 notches 1/2 = 3 notches 3/4 = 2 notches full = 1 notch

Browning has a web site with lots of information and a search function that will help you.

Perazzi shotgun choke markings are as follows the KG xxxx is the gram weight of the barrels the 18.4 being .724", 18.5 being .729" is the internal bore diameter of the barrels the circles with a dot in the are the points of choke old Europeain markings the choke with 1 dot is full, 3 dot is modified, 5 dots is cylinder. guns with choke tubes the markings go from 1 to 10. each number times .004" equals the points of choke. there fore full choke is 10 and represents .040" choke. down to 1 which is .004" improved cylinder Perazzi shotgun choke markings are as follows the KG xxxx is the gram weight of the barrels the 18.4 being .724", 18.5 being .729" is the internal bore diameter of the barrels the circles with a dot in the are the points of choke old Europeain markings the choke with 1 dot is full, 3 dot is modified, 5 dots is cylinder. guns with choke tubes the markings go from 1 to 10. each number times .004" equals the points of choke. there fore full choke is 10 and represents .040" choke. down to 1 which is .004" improved cylinder Perazzi shotgun choke markings are as follows the KG xxxx is the gram weight of the barrels the 18.4 being .724", 18.5 being .729" is the internal bore diameter of the barrels the circles with a dot in the are the points of choke old Europeain markings the choke with 1 dot is full, 3 dot is modified, 5 dots is cylinder. guns with choke tubes the markings go from 1 to 10. each number times .004" equals the points of choke. there fore full choke is 10 and represents .040" choke. down to 1 which is .004" improved cylinder Perazzi shotgun choke markings are as follows the KG xxxx is the gram weight of the barrels the 18.4 being .724", 18.5 being .729" is the internal bore diameter of the barrels the circles with a dot in the are the points of choke old Europeain markings the choke with 1 dot is full, 3 dot is modified, 5 dots is cylinder. guns with choke tubes the markings go from 1 to 10. each number times .004" equals the points of choke. there fore full choke is 10 and represents .040" choke. down to 1 which is .004" improved cylinder Perazzi shotgun choke markings are as follows the KG xxxx is the gram weight of the barrels the 18.4 being .724", 18.5 being .729" is the internal bore diameter of the barrels the circles with a dot in the are the points of choke old Europeain markings the choke with 1 dot is full, 3 dot is modified, 5 dots is cylinder. guns with choke tubes the markings go from 1 to 10. each number times .004" equals the points of choke. there fore full choke is 10 and represents .040" choke. down to 1 which is .004" improved cylinder Perazzi shotgun choke markings are as follows the KG xxxx is the gram weight of the barrels the 18.4 being .724", 18.5 being .729" is the internal bore diameter of the barrels the circles with a dot in the are the points of choke old Europeain markings the choke with 1 dot is full, 3 dot is modified, 5 dots is cylinder. guns with choke tubes the markings go from 1 to 10. each number times .004" equals the points of choke. there fore full choke is 10 and represents .040" choke. down to 1 which is .004" improved cylinder Perazzi shotgun choke markings are as follows the KG xxxx is the gram weight of the barrels the 18.4 being .724", 18.5 being .729" is the internal bore diameter of the barrels the circles with a dot in the are the points of choke old Europeain markings the choke with 1 dot is full, 3 dot is modified, 5 dots is cylinder. guns with choke tubes the markings go from 1 to 10. each number times .004" equals the points of choke. there fore full choke is 10 and represents .040" choke. down to 1 which is .004" improved cylinder

Browning made choke tubes.

AnswerEarly Stevens shotguns did not have choke markings.sales@countrygunsmith.netOn my Savage semi-autos, a model 755A and 775A, the chokes are marked with an asterisk on the rear left side of the barrel. One for full, two for mod., three for IC.

You will have to contact Browning to find out.

If it has choke tubes, yes. If it is fixed choke, no. I called Browning about mine and that was the answer they gave me.

People also asked