0
it convers 12 volts into 50,000 volts
Coil in electronics means wire wrap around some media the get different uses in applications. The above answer only pertains to coil on a car I suppose
It is part of the ignition system. in older cars, it is a single unit that is about the size of a coke can. In many newer cars, you have individual coil packs sitting on top of each spark plug.
Wiki User
∙ 14y ago
Wiki User
∙ 16y agoA coil that transmits heat either an electric element or possibly a copper / steel coil immersed in a liquid and steam passes through the coil or extreamly hot water and by osmosis the ambient medium gets hotter
A coil that transmits heat either an electric element or possibly a copper / steel coil immersed in a liquid and steam passes through the coil or extremely hot water and by osmosis the ambient medium gets hotter
Wiki User
∙ 8y ago- an inductor
- an electromagnet
- the inductive part of a resonant circuit
- the inductive part of a ripple filter circuit in a power supply
- an RF blocking device
- etc.
Wiki User
∙ 11y agoI think its used for controlling the heat and motion!!
<a href="http://www.babyography.net.au/cot-sheets-and-separates">buy cot sheet sets online</a>
Wiki User
∙ 11y agoprovide a low value inductance
Add your answer:
Earn +20 pts
Which oscillator circuit uses a tapped coil in the tuned circuit?
Several oscillator designs use a tapped coil in the tuned circuit. The most common is the Hartley oscillator.
Can a 12vac coil be operated by 24vdc?
no, in an ac circuit the coil provides impedance but the DC coil needs some resistance to limit the current
How is a Blowout coil connected?
A blowout coil connected in series with contactor's auxiliary contacts that shunt around the main contactor contacts. The coil is out of the circuit when the main contactor contacts are closed and in the circuit when the main contactor contacts are open.
What are two sources that a circuit might use?
coil and oil
What happens to the coil of wire when someone presses the switch?
If the coil is connected to a circuit and the switch is closed then, provided there is a power source, the coil will become energized.
Which oscillator circuit uses a tapped coil in the tuned circuit?
Several oscillator designs use a tapped coil in the tuned circuit. The most common is the Hartley oscillator.
What is SPOUT Circuit ground coil 1234 1993 Ford Ranger?
what is spout circuit coil 123or4 1994 ford ranger
How many coils in air circuit breaker?
There are three coils in Air circuit breaker.. 1.Solonoid coil 2.Moving coil 3. fixed coil
How do you connect energy meter in circuit?
pressure coil or voltage coil across the supply and the current coil in series.
What is the function of an electrical coil in a basic circuit?
There are a couple of examples that come to mind where there is a coil in a circuit. One is, the coil is used as a choke to block harmonics from going down the electrical line. Another example of a coil in the line is the coil in a magnetic contactor. When this coil is energized the contacts of the magnetic contactor close.
Can a 12vac coil be operated by 24vdc?
no, in an ac circuit the coil provides impedance but the DC coil needs some resistance to limit the current
How is a Blowout coil connected?
A blowout coil connected in series with contactor's auxiliary contacts that shunt around the main contactor contacts. The coil is out of the circuit when the main contactor contacts are closed and in the circuit when the main contactor contacts are open.
What are two sources that a circuit might use?
coil and oil
What happens to the coil of wire when someone presses the switch?
If the coil is connected to a circuit and the switch is closed then, provided there is a power source, the coil will become energized.
How are safety switches wired to the holding coil?
In control circuit wiring the safety switch is in series with the holding coil.
What is quality factor for choke coil?
the quality factor for choke coil is impedence divided by resistance in a given circuit
How do you fix P0352 ignition coil B primary secondary circuit malfunction?
Replace the ignition coil(s).
