The water will turn into water vapor which is gaseous H2O. If the vessel is not strong enough to withstand the increased pressure applied in all directions the vessel will open or break if possible. Otherwise the pressure will just increase based on how much steam is created.
it destroys the world, but if veryone is dead, WHO WAS PHONE?
Well it boils away and because the vapour is is inflammable you will get a fire. Inflammable volatile substances should never be heated up using a naked flame, its dangerous.
After a while the water would probably start to boil
It gets higher. The energy state of the waters' atoms rise due to the the heat transferred to the water through the beaker.
It Increases
It burns
The most efficient, and safe, place for a beaker to be heated is above the flame. Have the beaker held up by the proper metal stand and have it held so that the flame is grazing the bottom of the beaker. Be careful though, the flame should only graze the bottom of the beaker so that the chemical doesn't heat up too quickly.
A patato cube is placed in a beaker filled with hot salt water and another patato cube is placed in a beaker filled with cold salt water?
The mat that is placed under a Bunsen burner can be referred to as a heat proof mat.
You havesome options to get this done. The first is to set up a tripod with some wire gause across the top and place a Bunsen burner underneath, place the beaker on top and it will heat it. A much better way to do this is to use a hotplate and a magnetic stirrer, these hotplates are designed to got to specific temperatures. For round bottomed flasks an oil bath is put on top of the hotplate and the flask clamped into the oil and a magnetic stirrer placed in the oil bath, the round bottomed flask is clamped in place with a retort stand and clamp.
Generally it is used with a ring stand and a ring. The wire gauze is placed on the rind, a beaker or flask is placed on the gauze, and heat is applied by a Bunsen burner.
In Science, a tripod is a piece of equipment, used to hold a beaker or container. The gauze mat is what is placed ontop of a tripod to hold said beaker/container. These two pieces of equipment are usually accompanied by a bunsen burner.
It burns
A ring stand is used to hold a ring, upon which a beaker with some solution in it could be supported. A bunsen burner could be placed under the ring and used to heat the solution in the beaker.
typically undergoes heating and may undergo a phase change or chemical reaction depending on its properties. The Bunsen burner provides a consistent and controlled source of heat to increase the temperature of the substance, allowing for various processes such as evaporation, combustion, or decomposition to occur.
Hold it by the top or use a clamp. But make sure before you take the temperature you stir the liquid around in the beaker first and that you do not let it touch the bottom of the beaker as the glass will be hotter than your liquid.
The most efficient, and safe, place for a beaker to be heated is above the flame. Have the beaker held up by the proper metal stand and have it held so that the flame is grazing the bottom of the beaker. Be careful though, the flame should only graze the bottom of the beaker so that the chemical doesn't heat up too quickly.
This serves to spread out the point of application of the heat.
it would shrink in cold and expand in warm, if you really want to surprise your teacher say it has to do with particle theory
the base of an evaporating dish is rounded and will not be stable when placed on a gauze, hence a triangle (tripod) to hold its base better . Also, when you heat the beaker, you put the wire gauze above the triangle(tripod) and the triangle(tripod) above the Bunsen burner.
A patato cube is placed in a beaker filled with hot salt water and another patato cube is placed in a beaker filled with cold salt water?
The temperature will decrease