Whatever you want, as long as it can fit in there. Those dang pills are small!
an empty water bottle
It should get pushed in slightly as the molecules are moving slower therefore the pressure inside is reduced
we can separate them by using the method of sedimentation and decantation in which the solution is left undisturbed for sometime in an empty cold drink bottle and then oil forms a layer on upper side of the empty cold drink bottle. and then pour the upper liquid in the other container.This is how we can separate the mixture of oil and water using a empty cold drink bottle.
The plastic bottle (which is a blight on our planet and should not be bought and tossed away lightly) is made of very thin plastic. As thinly as possible to make it inexpensive to manufacture (so that it can be bought and tossed away thoughtlessly to fill landfills). A small drop in temperature, after the lid is on, will mean that the pressure in the bottle is less than the outside pressure so the bottle implodes. Try drinking the contents of a bottle of water, put the lid on and put it in the freezer. Observe what happens.
This answer presumes that "empty" means the bottle has no water in it, but does have air in it.In this case the bottle would collapse (or partly collapse) if the temperature inside the bottle dropped to a lower temperature causing the air inside to shrink, or if the bottle was taken to a place of higher air pressure (such as taking the bottle from a mountain peak to the base of the mountain.The bottle would also collapse at some point of evacuation if "empty" means the bottle was evacuated of water and air. The point of collapse, in this case, would depend on the physical construction of the bottle - ie, whether it was made of steel, plastic or glass
Put the empty bottle near a fire.
It will get cold.
Where is the bottle? There are droplets so it is not empty. An empty bottle is empty of liquid conent but it will have air in it.
Where is the bottle? There are droplets so it is not empty. An empty bottle is empty of liquid conent but it will have air in it.
Fill the 7 liter bottle. Then put it into the 5 liter bottle. This leaves 2 liters in the big bottle. Empty the 5 liter bottle. put the remaining 2 liters into the 5 liter bottle. Fill the 7 liter bottle again. Again, put it into the 5 liter bottle. This will now leave 4 liters in the big bottle. Empty the 5 liter bottle. put the 4 liters in. Fill the 7 liter bottle one more time. put it into the 5 liter bottle. Since there were already 4 liters in the small bottle, it can only hold 1 more, leaving 6 liters in the big bottle. after that u will win it!!!!!!!! Fill the 5 liter bottle. Then put it into the 7 liter bottle. Fill the 5 liter bottle again and put it into the 7 liter bottle. This will leave 3 liter in the small bottle. Empty the 7 liter bottle and put the 3 liter water from 5 liter bottle to 7 liter bottle. Fill the 5 liter bottle again and put it in 7 liter bottle, only 1 liter will left in the 5 liter bottle. Empty the 7 liter bottle and put the 1 liter from 5 liter bottle to 7 liter bottle. Fill the 5 liter bottle again and empty it into the 7 liter bottle. You will end up with 6 liter in the 7 liter bottle. You Win......
Vial is a synonym for pill bottle.
First open up the Pouch menu by holding - (minus) then put the cursor finger over the bottle you want to equip and then let go of -. Once the bottle is equipped press A to use it or empty it.
By definition, an empty bottle has nothing inside.
But it in the other bottle. In general, you want to minimize exposure of liquor to air.
Fill Bottle 7 . . . then use bottle 7 to fill bottle 5 . . Empty bottle 5 and put the remaining two litres from bottle 7 into bottle 5 . . Fill bottle 7 then use bottle 7 to fill bottle 5 . . empty bottle 5 . . Fill bottle 5 with the remaining 4 litres in bottle 7 . . fill bottle 7 and then use bottle 7 to fill bottle 5 . . this will leave you with 6 litres in bottle 7 . . Done and Done lol 2nd solution: step 01.: fill bottle 5 (0;0 >> 0;5) step 02.: put bottle 5 to 7 (0;5 >> 5;0) step 03.: fill bottle 5 (5;0 >> 5;5) step 04.: put bottle 5 to 7 (5;5 >> 7;3) step 05.: empty bottle 7 (7;3 >> 0;3) step 06.: put bottle 5 to 7 (0;3 >> 3;0) step 07.: fill bottle 5 (3;0 >> 3;5) step 08.: put bottle 5 to 7 (3;5 >> 7;1) step 09.: empty bottle 7 (7;1 >> 0;1) step 10.: put bottle 5 to 7 (0;1 >> 1;0) step 11.: fill bottle 5 (1;0 >> 1;5) step 12.: put bottle 5 to 7 (1;5 >> 6;0) Done
There are directions on each pill bottle that will tell a person how to use them. When swallowing a pill, some people put them on the back of their tongue and swallow water.
an empty water bottle