answersLogoWhite

0


Best Answer

Well, if you're skilled and stubborn it is possible to use a hammer and a drift punch to open (and close) a bicycle chain, but it will take easily 3-4 times as long as using a chain breaker.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What can you use instead of a chain break on your bike?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you clean mountain bike?

A clean bike chain is essential for a smooth and efficient ride. Here are the steps to clean your bike chain properly: Remove: If your chain has a master link, you can easily detach it from the bike. If not, you can use a chain tool to break the chain at any link. Degrease: Use a degreaser spray or a solvent to soak the chain and dissolve the dirt and grease. You can use a brush or a rag to scrub the chain gently. Rinse: Use water to rinse off the degreaser and the dirt from the chain. Make sure the chain is completely clean and dry before reattaching it to the bike. Lubricate: Apply a thin layer of lubricant to each link of the chain. Wipe off any excess lubricant with a rag. Lubricating the chain will prevent rust and reduce friction. By following these steps, you can keep your bike chain in good condition and enjoy a better riding experience. These were the simple steps to clean your bike chain.


What is a 10-speed bike?

a 10 speed bike use to be a bike, that has 2 chain wheels at the pedal and 5 chain wheels at the back wheel, thsu making 10 different combinations that the chain wheels can be used. it can also mean a 20spd road bike...but instead of saying 20spd we say 10spd as slang because it has 10 gears at the back and 2 at the front 10x2=??


Is there a bike chain on a car?

Usually not. Some car engines use a chain for the valve timing, but it's quite different from a bicycle chain. Cars that have electrically opened doors may have a chain quite similar to a bike chain in that mechanism.


How can you get linkage bolt out on a motocross bike?

Do you mean the chain pin. If that is the case use a chain breaker you can get them at the dealership.


How do you use reeve in sentence?

Make sure you reeve the bike with the chain to the bike rack so it doesn't get stolen.


How do you use bicycle chain for steering?

Usually, you don't. Steering is done by the handle bar, the chain is used to power the bike forward.


Can you use bike chain lube on a rubik's cube?

Nope, the cube will remain sticky, if not stickier


What are vehicals?

vehicles are something that people use to get around instead of bike or feet


How do you make a button break a chain in Littlebigplanet?

You have to use the analog stick


What can you use instead of spraypaint to paint your bike?

i just spray painted my bike and it looks great but it has some air bubbles not to bad


How do you cut i bike chain?

To remove a bike chain, there is a special tool called a chain break tool, available at bike shops. What this tool does is push out a pin holding the links together. In an emergency, you could possibly use a vise to hold the chain, and a small nail punch to push out the pin. Using the tool designed for the job is much easier. If you are replacing links in the chain, or putting a new one on the bike, the tool can be used toreinstall the pin. Be careful when you push the pin out, that you don't push it completely out of both sides of the link. You want the pin to remain attached to one side of one link, or else you will spend a lot of time getting the pin reattached The tool can be somewhat expensive, so ask how much the bike shop would charge to remove the old worn out/rusty chain and install a new one. Refer to SheldonBrown.com/chains.html for more information and pictures to explain chain removal.


What products are good for the environment?

Use stainless steel water bottles instead of plastic ones. Use your bike or walk to places instead of using your car.