An amplifier needs at least one active device (transistor or op-amp), a feedback loop, and proper phase shift to create oscillations. The loop gain of the amplifier must be greater than or equal to one and the phase shift around the loop must be 360 degrees or a multiple of 360 degrees. Additionally, some form of energy storage (inductors or capacitors) is typically required in the feedback loop to sustain oscillations.
For a system to oscillate, it must have both inertia (resistance to change in motion) and a restoring force (a force that brings the system back to its equilibrium position after being displaced). These two properties are necessary for the system to oscillate back and forth around a stable equilibrium point.
Light consists of electromagnetic waves that oscillate due to the varying electric and magnetic fields associated with it. These waves oscillate perpendicular to each other and to the direction in which the light is traveling.
The word "oscillate" in everyday speech means to go back and forth, either physically or mentally. An example of a sentence using the word "oscillate" is "My new job is great, but I have to oscillate between New York and Los Angeles at least once a week. "
For an oscillator to oscillate, it needs a restoring force to bring it back to a central position after being displaced, an initial displacement to start the oscillation, and a mechanism to convert potential energy into kinetic energy and vice versa. Additionally, the system must have some form of damping to offset losses and sustain the oscillations.
No, electromagnetic energy can travel through a vacuum. It propagates through space as electric and magnetic fields that oscillate in a perpendicular fashion.
A: Very easy to do just provide a positive feedback and/or a phase shift it will oscillate
Amplifiers are the device which are used to amplify a signal Multistage amplifier are use to amplify a signal into a desire level
it all depends on its open loop gain or crossing the zero db point at slope less the -1db
NO. They do not oscillate.
Differential amplifier ANSWER: A differential amplifier is an op amp. If any amplification is required a preamplifier is used mainly to cut the white noise and improve the input impedance
For a system to oscillate, it must have both inertia (resistance to change in motion) and a restoring force (a force that brings the system back to its equilibrium position after being displaced). These two properties are necessary for the system to oscillate back and forth around a stable equilibrium point.
Yes, oscillate is a verb.
An ordinary amplifier can have high gain but is unstable, drifts, can oscillate, etc. An amplifier with negative feedback has lower gain but is stable, does not drift, won't oscillate, etc.
The swing will oscillate after Helen moves it.
This answer is not simple amplifier if the gain is unlimited will tend to oscillate at higherfrequency usually there is a pin out for some amplifiers whereby adding a snub or capacitor will limit this gain internally so it can be stabilized. There is recommended techniques by not a guaranty of stability it depends on the amplifier bandwidth factor Q and grounds and other factors.
It will oscillate if the loop gain exceeds 1 when the phase difference round the loop is 360 degrees. The frequency of oscillation is set by the loop phase being equal to 360 degrees.
It can be, but may not be required. Capacitors are used for biasing purposes, to remove DC from inputs, and for filtering in amplifier circuits (just to name a few).