The dashboard lights on a Nissan are indicators to help maintain the safety of the vehicle. These lights let you know when you are running out of gas, oil or if you need to have your engine checked.
How do you replace the dash lights on a 2004 Nissan Quest
yes
Check fuses, common circuit
why is my dash board lights not working
Typically your dash lights go out when you are driving with no tail/brake lights. So check those fusses to see if one is blown, this is a safety feature.
The dash display lights on a Nissan Terrano II can indicate several things. Some indicate oil levels while others indicate an engine problem or some other mechanical failure.
http://www.geocities.com/amixam69/nissan/dash/ go to that site and it gives you step by step instructions on how to remove your dash.
Turn up your dimmer switch. Should be next to the steering wheel on the dash board.
The fuse for hazard and signal lights on the Nissan Serena is in the fuse box, bottom row. The flasher fuse for hazard and signal lights is located in the dash just to the left of the radio.
Bad fuseTry replacingIf it continues to blow you will have to check circuit to find problem
It controls the headlights, dash lights, tail lights and park lights. You don't repair it you replace it.
It depends what lights you are talking about, most dash lights are just bulbs. However in the cluster for digital lights and the fog light acessories they are done by LED lights in which you can replace if you know the right voltage. There are a lot of dash lights, so IRepairing Dashboard LightsTake apart the dash (or area where the lights are burned out) and replace the bad bulbs with good ones.