To make a simple series circuit to light a bulb, the simplest components are a power source (such as a battery); a switch (to turn the power on or off); the bulb (obviously !); and some wires to connect everything together.
it remains same i=voltage/total resistance
The failed bulb breaks the circuit so no current can flow - so the other bulb goes out (but is OK).
it would be ok in a circuit which didn't need a light bulb.
The bulb converts energy from the power source into light and heat. It is the load in the circuit.
All other light bulbs will turn off due to the series circuit being broken. The electrons cannot travel all the way through, hence the current will also not flow in the circuit, switching off all the other bulbs too.CommentIt's worth pointing out that the full supply voltage will then appear across the lamp holder -so take care!
You need a Battery, Light Bulb, Ammeter, Switch.
If one light bulb in a series circuit fails, all the other light bulbs will go out, until the failed bulb is replaced and the series circuit is completed again.If one light bulb in a parallel circuit fails, all the other light bulbs will still work.
You need a Battery, Light Bulb, Ammeter, Switch.
The amps (ampiers) decrease when in a series circuit ( with a light bulb)
The function of a light bulb in an electric circuit is that it turns electrical energy into light.
A light switch is in series with the light bulb it controls.
The circuit will have the flow of electricity interrupted.
series
u see the light bulbs on a series circuit's brightness evolves and the brightness on a parallel's circuit dont
A voltage or current source in series with a circuit breaker or fuse in series with a switch in series with a light bulb.
Current in a series circuit is the same throughout the circuit. Voltages are additive. Voltage in a parallel circuit is the same throughout the circuit. Currents are additive.
parallel circuit: Providing that the breakage does not result in a short circuit the other bulbs will still light. series circuit: If the breakage results in a short circuit through the bulb the other bulbs will light more brightly. If the breakage results in a breakage of the connection through the bulb then the other bulbs will not light.