Cubic Feet per Minute (CFM).
A measure of how much air moves in a minute, measured in cubic feet (the amount of air which fits inside a box 1 foot wide, one foot high, and one foot long).
Most vacuums and fans are rated in terms of CFM. It tells how much air gets moved in a given length of time.
More CFM is usually better, but it usually comes at the cost of more noise.
the throttle body is rated at 330 cfm
2200 cfm
CFM is a way of saying ft3/min, or cubi feet per minute. It is a measure of the volume of air a fan can move in a minute. Generally speaking, the higher the CFM, the more powerful a fan it is. Or, if you happen to be in the aircraft industry, CFM refers to the company CFM International, a 50-50 joint venture between General Electric of the United States and Snecma in France.
Cmh = cubic meters per hour cfm = cubic feet per minute m3/hr * 35.3ft3/m3 * hr/60minutes = ft3/minute So, 1 cmh = 0.5883 cfm
1. ASSUMING AIR DENSITY AND FAN BLADE DIAMETER IS CONSTANT OR THE SAME --THE LATTER (1750 RPM) DELIVERS MORE CFM WHETHER BELT DRIVEN OR DIRECT COUPLED -- SAME HP RATING OF MOTOR. 2. 1250 RPM FAN CAN MATCH THE CFM OF 1750 RPM FAN --- CHANGE OR ADJUST THE PITCH OF 1250 RPM FAN BLADE. 3. 1250 RPM FAN CAN DELIVER MORE CFM THAN THE 1750 RPM FAN --- REPLACE FAN BLADE. 4. 1250 RPM FAN CAN DELIVER MORE CFM THAN THE 1750 RPM FAN --- REPLACE WITH BIGGER HORSE POWER.
One of the top designations/certifications awarded by the International Facility Management Association, CFM for Certified Facilities Manager.
It really depends on what you feel is better for you. If you have a bad back and don't like to bend over, then the stand-up vacuum is probably the way to go.
To convert cmh to cfm ..... divide cmh by 1.7 to convert into cfm....
There are a few Gast vacuum pump models online. You can purchase the Gast 18700 Vaccum Pump 24 X.5 CFM model from Amazon. It is selling for $477.30 with shipping for $60.00
Tr = cfm/400
750 CFM
go to google or yahoo and do a search for "vacuum line routing edelbrock"..... it should give you alot of pages. choose the one from edelbrock.
5-10 cfm = -5
1tr = 400 cfm
CFM International was created in 1974.
the best HnS players are: -cFm |K[a]YD!zZzZ -cFm | TaCo -cFm | KillaKount *dankHnS|DADDADADA-cFm| the "-cFm|" clan is the clan u want to be in if u want to be up there with one of the best.-cFm| stands for Come Find Me -cFm| IS HNS!
When you get ready to run the vacuum line from the turbo 400 trans modulator to an Edlebrock Performer 800 CFM carb, attach the vacuum line for the transmission vacuum modulator to the bottom constant vacuum source or the plug that is below the throttle plate. After that, install the vacuum advance to the port that is signaled or right above the throttle plate. Once that is completed, install the large vacuum line to the back of the carb for the power brake.