SPI, in Project Management Terms, is short for Schedule Performance Index. It's an indicator on whether the Project is on Schedule (SPI = 1), Ahead of Schedule (SPI > 1), or behind Schedule (SPI < 1).
spi*dmzisrisp
it mean your off your head
communty mean a group of people
What does ppy mean
what does mean by this close-box
Split Port Injection ( Ford )
whai is SPi?
In-spi-ra-tion.
SPI stands for Schedule Performance Index. SPI is a measure of the schedule efficiency of a project calculated by dividing earned value (EV) by planned value (PV).
SPI > 1: Project Ahead of schedule SPI = 1: Project on Schedule SPI < 1: Project behind Schedule
spi futures
There are 3 syllables. Spi-ral-ing.
Byte Paradigm has got a product range that more or less compete with Aardvack. However, products do not strictly overlap. SPI Storm from Byte Paradigm is a SPI Adapter with support of dual-SPI, Quad-SPI and user-defined serial protocols. It supports protocols up to 100 MHz. SPI Xpress from Byte Paradigm is a more limited, yet entry-level price. It support SPI up to 50 MHz. As for I²C, they also have I2C Xpress.
6.53
The contractor is accomplishing the work more efficiently than expected. The SPI is > 1.
Major Difference Between SPI and I2C is: SPI is full Duplex (SPI can be full/half duplex, depending on the hardware, 3 or 4 wire) and I2C is half duplex communication....we cannt send and receive data at a time in I2c..but it possible in SPI ....SPI much faster Than I2C....... Main topic to discuss the difference is 1) speed is difference in case of i2c is 100/400kbps in 7 bit mode max 400kbps (But High speed I2C communication protocols allow speeds upto 3.4Mbps!!) in case of spi speed is upto 1mbps (the higher speed of SPI is due to fact that unlike I2C, SPI interfaces to a slave device using a sperate pin called the slave select + no concept of acknowledgements which means increased Band width..) 2)Connection wise: i2c require less pin then spi (SPI 3wire: 3 IOs, SPI 4 wire: 4 IOs, I2C: 2 IOs) as spi require slave select for individual device... 3)it is better to use i2c in case of if u want to connect more device to connect. (slave addressing advantageous over SPI slave select individual pins for individual slaves) 4)bus arbitration is possible in case of i2c... not in case of spi... (SPI does not require it, since only 1 slave is controlled by the master at any given point) 6)noise sensitivity of i2c is high... there is chance to corrupt the r/w bit... then whole data is corrputed... but in case of spi.. chance is very less as whole word is trasmitted... However, I must say that I2C is more reliable, since the protocol supports slave feedback machanism (ACK) to detect whether was received correctly or corrupt. 8) it is easy to implement the spi...while i2c is little bit complex... (over heads) Formatted Answer @: http://www.bubblews.com/account/65122-kapilddit
The cast of Kavoka Spi - 2008 includes: Narin Jang as Sorgul Siyar Tayib as Sardar