the fuction of the temp switch. is to comunicate with your car computer and register the temperature on your cars gauge. to let you know how hot your car is running or if its at risk of over heating. whitch if occurs can cause very expensive repairs
A bi-metal strip can be used as a thermostat. It consists of two metals that expand by different amounts when the temperature changes, so it will bend when heated. When the temperature is hot, the switch will close. When it is cold, the switch will open. They are not as accurate and quick to respond as sensors, yet they are less expensive.
It is a simple device. A variable electronic resister, called a thermistor, is used and is on the end of the cord. The resister varies it's resistance value depending on temperature. The probe must be placed in the area (outside) where you want the temperature. There is a second one in the unit itself and will show the inside temperature.
The switch contains a sandwich strip of 2 metals with two different coefficients of thermal expansion. The dial you would turn to control the temperature modifies the resistance of the circuit - thus current (or would be set digitally nowadays). When the desired temperature has been reached, one of the metals stretches more than the other. The metal sandwich curls, thus disconnecting the contact of the switch.
A bimetallic strip is two different metals glued together. When the temperature changes each metal expands (or contracts) but by different amounts, so the strip as a whole ends up bending. This bending property can be used to turn on (or off) a heater switch.
A switch has moving contacts, name them ?
what are the symptoms of a bad temperature switch
Remove the temperature control switch wiring harness. Remove the temperature control switch retaining screws. Reverse the process to install the new temperature control switch.
where is temperature switch on 1996 buick regal
to tell wat temperature your engine is.
to tell wat temperature your engine is.
The engine temperature cooling switch helps regulate the engine's temperature. Teemed with the radiator and incoming air, this keeps the engine at its optimal performance temperature.
There is no such thing as a: temperature switch, on your Ford focus, the coolant temperature sensor is located on the front of the engine.
Thermal switch is to cut off the pilot ignition circuit when the heater temperature is beyond a set temperature. The thermal switch limits the temperature and protects the heaters
Thermal switch is to cut off the pilot ignition circuit when the heater temperature is beyond a set temperature. The thermal switch limits the temperature and protects the heaters
Please edit your question to be more specific. Which temperature switch? Radiator fans? Air conditioning? Other?
The temperature sensor you're asking about is a device that detects a temperature above a specific point, usually somewhere around 180F, then closes the contacts of a switch. The switch can directly run a motor or it may be connected to a relay. If the contacts of the temperature sensor switch become damaged they can weld together and the switch will stay on constantly.
== ==