About 50 pounds
13 ft by 23 ft = 299 ft2 and one standard sheet of plywood is 4 ft by ft = 32 ft2. 299 / 32 = 9.34 sheets, so you will need to purchase 10 sheets of plywood.
It depends on the density of the plywood. This site shows some plywood densities in kg/m^3. Let's say your plywood is 500 kg/m^3 (which is at the low end of the plywood densities isted on that page). Converting the dimensions of the plywood to meters gives the following: height: 4 ft = 4 ft * (12 in/ft) * (2.54 cm/in) * (1m/100cm) = 1.22 m width: 8 ft = 8 ft * (12 in/ft) * (2.54 cm/in) * (1m/100cm) = 2.44 m thickness: 18 mm * (1m/1000mm) = .018 m The volume of the plywood is height * weight * thickness = 1.22 * 2.44 * .018 = .0535 m^3. Weight is density * volume. So, at 500 kg/m^3, the plywood would weigh: 500*.0535 = 26.8 kg. 1 kg is approximately 2.2 pounds, so 26.8 kg is 26.8 kg * (2.2 lb/kg) = 58.9 pounds. If, however for example, your plywood is 700 kg/m^3, it would weigh 40% more, or 82.5 pounds.
assuming standard sheet is 4 x 8 = 32 square feet roof is 29 x 45 = 1305 sq ft you need 1305/32 = 41 sheets
38 divided by 4 is 9.5
4 sheets approximately 24 inches by 48 inches can be made from a 4 foot by 8 foot piece of plywood. The reason it is approximate is the kerf of the saw blade takes up about 1/16 of an inch.
I NEED THE WEIGHT OF 7/16 OSB PLYWOOD One sheet will weight 47 lbs.price
25 lbs.
20-25 pounds per sheet, per 1/4" of thickness. In other words, about 25 pounds for a sheet of 1/4, about 50 pounds for a sheet of 1/2.
The easiest way to determine an honest weight of a 4' x 8' sheet of plywood? 20-25 pounds per 1/4" of thickness. 3 pounds per square foot per inch of thickness according to APA Plywood Design Specification.
Yes, one can you put A 4 x 8 sheet of plywood in a Ford Flex.
It depends what the "ply" value is ... the number of layers glued together. For instance, 1/2" plywood is going to be lighter then 3/4" plywood. A common rule of thumb is a 4x8 foot sheet of 1/4" fir plywood weighs 25 pounds. There are 32 square feet in a sheet, so a square foot of 1/4" fir plywood weighs about 0.78 pounds. Since 1/2" is twice as thick as 1/4", 1/2" fir plywood weighs twice as much, or 1.56 lbs, and 3/4" three times as much, or about 2.34 lbs. Fir plywood is common, but other species are available. Weight varies considerably between species of wood, so be aware the weight of plywood of different species can be different.
4*8
Area of a sheet of plywood = 4' x 8' = 32. 1700ft2/32ft2 = 53.125 54 sheets of 4' x 8' plywood would be needed to cover 1700ft2.
when asking this question you first need to take into account that plywood comes in different thicknesses therefore weight per particualr thickness of sheet plywood will vary-- in my opinion/ without fact and research / a sheet of 1/2 inch plywood may way about 16 lbs. while a 3/4 inch plywood sheet may way 70 lbs.
one
thickness and type of wood are varibles oak and maple are heaver than pine 3/4 is heaver than 1/4 and 1/2
The weight of any wood sheet good can vary based on species, moisture content, adhesive used, etc. However, a 1/4" x 48" x 96" sheet of LAUAN weighs approximately 17.5 pounds.