answersLogoWhite

0

The amount of runway needed form the time the brakes are released to the time the aircraft becomes airborne

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How do you calculate take off distance in a Cessna 172?

To calculate the takeoff distance for a Cessna 172, you need to consider the aircraft's weight, wind conditions, elevation, and temperature. Start with the aircraft's published takeoff performance chart, which provides distance required based on these variables. Typically, the takeoff distance is measured from the start of the takeoff roll to a height of 50 feet above the runway. Adjust the distance for any additional factors like obstacles or specific runway conditions.


Citation 2 aircraft takeoff and landing runway specifications?

Takeoff at Sea Level: 3,450 feet Takeoff at 5000' 25°C: 6,870 feet Landing Distance: 2,078 feet


What distance is required to clear a 50 foot obstacle after takeoff?

To clear a 50-foot obstacle after takeoff, the required distance will depend on various factors, including the aircraft's weight, performance characteristics, and environmental conditions. Generally, the required distance can be estimated using the aircraft's takeoff performance charts, which account for these factors. As a rule of thumb, many light aircraft may require around 1,500 to 2,000 feet of runway to safely clear a 50-foot obstacle. However, it's crucial to consult specific aircraft performance data for accurate calculations.


How do elevators affect takeoff?

Elevators help your takeoff by raising the tail of the aircraft and putting the whole aircraft in 'flight' attitude.


How do you determine the takeoff speed?

The takeoff speed of an aircraft is calculated based on factors such as aircraft weight, air density, aircraft configuration, and runway length. Pilots refer to the aircraft's performance charts or manuals to determine the specific takeoff speed required for a given situation. Aerospace engineers also use computational methods and simulations to calculate takeoff speeds during aircraft design and testing.


Takeoff speed of embraer 190 aircraft?

The takeoff speed for an Embraer 190 aircraft is around 140-175 knots (161-201 mph)


How far does it take for a jet to take off?

There is no one answer to this question. The takeoff distance varies widely between different makes and models of aircraft. Even if you pick just one aircraft model, such as an Airbus A320, there are still many different answers. It depends on the powerplants installed, what optional features the craft has, etc. For a single, particular aircraft, the Pilot must still compute the takeoff distance for each and every takeoff. It can be different every time. He uses the takeoff weight of the plane, subtracting the fuel burned during taxi. He must know the temperature, the barometric pressure, and the altitude of the runway, because all affect the distance. He must also compute the maximum distance the takeoff can go and still be able to abort and stop safely if there is a problem. Is the air conditioning on, using some of the engines power? Is the wind blowing? From what direction? These too affect the takeoff distance and must be taken into account. You can get an idea of the distance by looking at the length of airport runways. A jet will use a runway that will have sufficient length to get airborne PLUS extra length in case it has to stop.


What is balanced field takeoff?

A "balanced field" with respect to aircraft takeoff performance refers to the minimum length of runway that will allow for an aircraft to accelerate to V-1 (decision speed), experience failure of the critical engine, and then either stop in the remaining runway or continue to a successful takeoff meeting all applicable takeoff performance criteria.


What is the average vertical takeoff speed?

The average vertical takeoff speed for aircraft can vary significantly depending on the type and size of the aircraft. For helicopters, vertical takeoff speeds typically range from 40 to 60 knots, while small drones may take off at speeds as low as 10 knots. Larger aircraft, such as military vertical takeoff and landing (VTOL) craft, can have higher takeoff speeds, often exceeding 100 knots. Overall, the average vertical takeoff speed is highly dependent on the specific design and purpose of the aircraft.


What are minimum takeoff and landing lengths for Cessna Citation 2?

Are you looking for the CJ2, or Citation II? The website below has both aircraft and derivatives of them. Takeoff at Sea Level for CJ2 = 3,420 ft Landing Distance for CJ2 = 2,619 ft


How is the helicopter different from other flying machines?

Helicopters can land and takeoff vertically and also hover in flight. Winged aircraft can not do these things.


Where can one buy an aircraft landing lights?

Aircraft landing lights are key to takeoff and landing, and should always be working and checked prior to takeoff. Replacement lights can be purchased from Amglo and XEVision.