Crank angle sensor reads rpm and sends the signal to the ECU (computer) to aid in the calculation of engine rpm, ignition timing, fuel injection and crankshaft position.
Where is the crank position sensor 0n a 2001 mitsubishi Galant
there is no crank sensor on a Mitsubishi 3000 gt but there is a crank angle sensor that looks just like a distributor its in the back of the engine on top between valve covers
Behind harmonic balancer and timing belt on the 2.4 3.6-4 hrs
the cam angle sensor is the crank angle sensor it preforms both jobs
pcm or crank sencer
On a 94 Turbo DSM there is no crank angle sensor. The Cam Angle Sensor(CAS)serves the function of both a crank and cam sensor, and it's located on the passenger side of the valve cover at the end of the intake camshaft, you can't miss it.
You will have to test the resistance on it to make sure it is within specs.
how to ins toll a crank sensor on a 95 Mitsubishi 6v, but first of all my car crank to the point that it wanted to start but it does not start what might be the problem.
The crank angle sensor is located in the distributor.only in the 94 and 95 Honda accord.
You adjust the timing by moving the crank angle sensor. The crank angle sensor is driven by the camshaft closest to the intake manifold (passenger side of the engine) and is located behind the cylinder head and valve cover. Losen the bolt that secures the crank angle sensor, in order to move the crank angle sensor.
not behind the bell housing ?
Check with a "good" mechanic. They will hav a aual that outlines the average "shop" time to make this repair. They will give this info to you no chage.