The engine means check engine, the oil can means low oil, and the gas light means low gas. The ABS and brake light means that there is an issue with the ABS/brake system, and the bugle means the horn, and airbag light means issue with the airbag.
The 1997 Chrysler Sebring transmission is equipped with two transmission mounts. There will be a transmission mount at the back of the transmission, on each side.
The Chrysler 300 dashboard is held in place by 12 retaining clips. Pry outward on each retaining clip, one at a time. The dashboard will come off.
Two, one on each side.
The bleed valve on a 2000 Chrysler Sebring is located on the top of each brake caliper. It allows air to be purged from the system to ensure maximum braking power.
One on each corner.One on each corner.
The 1997 Chrysler Sebring parking brake cable has adjustment nuts on each end of the cable. Adjusting the nuts will lengthen or shorten the parking brake cable.
i just had the outer tie rods changed in my 1998 sebring convertable, it costs 65 for each rod, and the charge about 60 a side, total was about $250.00
IF the belt breaks, the valves can hit each other and bend. It is interference.
It has two shafts that have an inner and outer joint each. That totals four CV joints.
Chrysler Sebrings are found mostly at used car dealerships since the Sebring is no longer being manufactured as a new vehicle. You can find where they are available by looking through classified ads through your local newspaper, or by driving to each used car dealership.
Each dashboard light on a Honda Civic reflects a different component on the car. There is a check engine light, brake light, battery light, oil light, and several other that each relate to an engines system. When these lights turn on it mean that either a repair or maintenance is needed on the vehicle.
The part number for a 2000 Chrysler daytime running lights relay will be different for each manufacturer. Standard Motor Products sells this part as number RY-254.