It means if you don't know what your doing and you mess with it you will get hurt or killed.
That depends on what you mean. If you mean why does a circuit which has a high voltage side and a low voltage side have a greater average current on the low voltage side, it is probably because of power conservation: P = IV. If this is not what you mean, you will have to be more specific!
It depends what you mean by a 'high rating'!If you mean a high 'voltage rating' then, yes, you will require thicker insulation. But if you mean a high 'power rating', then, not necessarily, because the voltage can be low, while the current is high.Remember, the thickness of insulation depends on the voltage, while the type of insulation (how it withstands higher temperatures) depends on the current.
No. A megger's output voltage is not high enough to test the insulation of a high-voltage transformer if, by 'high-voltage transformer ', you mean a distribution transformer or power transformer. Instead, a high-voltage test set or 'pressure tester' (e.g. a 'HiPot' tester) must be used, as these produce far higher voltages.
when high voltage electricity is live
Voltage on ground can mean an open ground. It can also mean (high) current on ground, due to a ground fault such as reversed neutral and ground.
When it says the map sensor voltage is too high, this means that too much voltage is reaching the sensor. This can be a result of a failed component or a shorted wire coming into the sensor.
O2 Sensor (B1 S1) Voltage High
The high tension does not mean mechanical tension, it means high voltage, generally in the hundreds of KV
Code 24 throttle position sensor voltage low or throttle position sensor voltage high.
allows high-voltage shocks to be applied to the patient to stimulate heart action, without disconnect the EKG machine.Hope this helped! :)If you meant that the EKG registers high voltages (high R waves) and you are not referring to a "high voltage reading", if nothing else is abnormal, it could mean that the patient have a thin chest wall and pecs! Usually and echo will be done to make sure everything is okay.
Transformers are used to convert electricity from high voltage to low voltage and from low voltage to high voltage.
The charging system output voltage is too high or low.