your red brake light could be coming on because , you could be low on brake fluid, or your brakes could be worn , you need to check both of them,be safe do not drive until you do.
Check the brake fluid level in the reservoir, if it is low you have a leak somewhere.
brake light comes on on the dash
some cars abs light comes on if your third brake light is not working. check and see if a wire is broken, ect.
The parking brake light comes on when you engage the parking brake. Pull the parking brake release handle. ------------------------------------------------------------------------------- the brake light also comes on if the brake fluid level in the brake master cylinder is low ( in your engine compartment )
The brake light in the dash comes on if the parking brake is engaged or the brake fluid level is low in the brake master cylinder in the engine compartment
The brake light, a red light shaped like a headlight on the dash means that one or more exterior lights are not working. It could be a taillight, brake light, side marker, license plate light, or third brake light. It stays on all the time if it's a side marker or any light besides the brake light. If it's the brake or third brake light it will come on only when you press the brake pedal.
The brake lights on a 96 Jimmy are operated by the brake light switch, mounted on the brake pedal assembly. If the switch is bad the lights could stay on or off, or be sporadic.
one possible cause is low brake fluid in the resivoir under the hood, there is a float or sensor inside it that also turns the brake light on, you may want to check the inside of youre tires for wet spots to see if you have a brake fluid leak somewhere, hope i helped
Yes. One switch is for the left and right brake light assemblies; and, the other is for the 'third' brake light.
ADD BRAKE FLUID
On the inside of the trunk where the light comes through, you'll find 4 big round plastic nuts that you unscrew. The whole light unit comes out once those are removed.
Brake light, on your 2000 Chrysler Concorde, by accessing it from the inside of the trunk. Take hold of the brake light, push in and turn. The brake light will come out.