0
ANSWER: The light socket is bad. They eventually will burn up if you keep replacing the bulbs like you are doing now. Go get the revised light socket from the dealership and you will be good.
I have checked all bulbs and wiring in the rear, but the light keeps coming on rear lamp failure, is it a bad ground? if, so where will I look for it.
What else can I help you with?
How do you reset the brake lamp failure message?
replace the burnt out bulb
You dont have a manual and a light came on that looked like a kettle with lines in it and a exclamation mark inside of it 2007 Jeep Laredo?
Sounds like the low tire pressure indicator. I would describe it like a hurricane lamp with an upside down candle inside. Thank you very much for the answer, I appreciate that very much! Happy holidays!
What is the correct light bulb for a 1998 Jeep Cherokee Laredo brake light?
Answer...maybe Hey man, I don't know if they'd be the same after all this time, but my taillights in my 1988 Jeep Cherokee use 2057s, take out one of your working bulbs, and check the number written on the metal part. Or just bring the bulb to your local parts store, that's the easiest. The above answer contains some good advice on identifing auto lamp bulbs but is incorrect as to Brake Light Bulbs used in 1998. According to the 1989 Jeep Factory Service Manual (Electrical), All models of Jeeps of that year, (except, the Wrangler and the Grand Wagoneer), specified (2) Rear Stop/Tail Lamps Type 2057. The Front Park/Turn Lamps used (2) Type 2057NA, (Natural Amber), and the Rear Turn Signal Lamps used (2) Type 1156. The Wrangler used the same (2) Type 2057NA Front Park/Turn Signal Lamps, but instead used (2) combined Rear Stop/Tail/Turn Lamps Type 1157. The Grand Wagoneer used (4) Type 1157 for both Front and Rear Stop/Turn/Park Lamps and also used (2) additional rear Tail Lamps Type 1156. The Type 1156 Lamp has a single lighting element and was also used in the (2) Backup Lights of all models of that tear. (All other Lamps mentioned above are of the Duel Element type). After realizing that the year in question was 1998, not 1989 I did did an online search and found the answer to the actual question is a Type 3157. (See below.) bulbs.com Automotive Bulb Finder Result 1998 JEEP CHEROKEE HeadlightH6054 Standard LampH6054BV BlueVision: Experience HID-like performance in you carH6054HV Hi-Visibility: Puts up to 30% more light on the road Back Up Light1156 Standard Lamp1156LL Longer Life Upgrade: Lasts twice as long as the standard lamp Brake Light3157 Standard Lamp3157LL Longer Life Upgrade: Lasts twice as long as the standard lamp High Mount Brake Light922 Standard Lamp License Light168 Standard Lamp67 Standard Lamp Parking Light2057NA Standard Lamp Side Marker Light194 Standard Lamp194LL Longer Life Upgrade: Lasts twice as long as the standard lamp3157 Standard Lamp3157LL Longer Life Upgrade: Lasts twice as long as the standard lamp Step Light168 Standard Lamp561 Standard Lamp74 Standard Lamp906 Standard Lamp Tail Light3157 Standard Lamp3157LL Longer Life Upgrade: Lasts twice as long as the standard lamp Turn Signal Light1156 Standard Lamp1156LL Longer Life Upgrade: Lasts twice as long as the standard lamp2057NA Standard Lamp Ash Tray Light1891 Standard Lamp Glove Box Light194 Standard Lamp194LL Longer Life Upgrade: Lasts twice as long as the standard lamp Instrument Panel Light74 Standard Lamp Map Light561 Standard Lamp906 Standard Lamp912 Standard Lamp Trunk/Cargo Area561 Standard Lamp
What are the fuses inside the glove box of a 1993 jeep grand Cherokee limited for?
It could be for many things, Heres a list: Radio, cigar lighter, rear washer switch, airbag, lamp out module, overdrive, obd II, VIC, graphic display module park, side lamps, overhead console lighted visor, auto dimming mirror, body amp, cluster, body controller, rear wiper motor, flipper glass solenoid, cargo lamp, trailer tow, brake switch,rear window defroster, ABS, heater / A/C, hazard switch turn signal...
1995 Jeep Grand Cherokee Limited you replaced all the bulbs all around the vehicle and you are still getting the rear lamp failure in the computer graphic why is that?
Not sure if you would notice this, but the same thing drove me crazy with my '94 JGK, finally noticed just ONE of the two rear window mounted brake lights was out. Not noticeable when driving because it's shielded somewhat by the interior plastic cover and it's twin is still noticeably working. Happened to see the wife apply the brakes while driving away or would never have thought to look there. Just a thought and .
Why would the display indicate rear lamp failure when it is not on a 1998 5.9 Jeep Grand Cherokee?
Check the rear license plate light.
How do i get the rear lamp failure to go off on my 95 grand jeep Cherokee?
You have to find and repair the problem in the rear lighting circuit. It could be a blown bulb, a bad ground, a broken wire, etc.
Lamp failure 1997 Jeep Grand Cherokee?
most likely it is the high mount rear brake light. Open hatch and you will see where to remove the screw to access the bulb.
Where the rear lamp is located in a 1993 Jeep Grand Cherokee?
Rear lamp? Oh, I dunno ... maybe you need to turn around and look? A lamp isn't that hard to find ...
Where is the rear tail lamp failure module located on 2002 Lexus ls430?
5657439929222222220
What does fuse number 23 operate in a 2002 Jeep Liberty?
Rear lighting: Tail/Stop Lamp
What is rear light warning failure on a 1995 Toyota Avalon?
it means a brake-lamp bulb has burned out
Where is the brake light failure sensor in a 1997 acura 2.2 cl?
The brake light failure sensor on a 1997 Acura 2.2 cl is located on the rear of the car. It is on the back of the left rear lamp assembly.
How do you replace license plate light bulb on a 2000 Grand Cherokee Laredo?
Hard to see, but on my 96 Jeep Gr Cherokee there are two small screws next to each lamp on the outside.
How do you change the license plate light on a 1994 camaro?
Remove two rear lamp bolt/screws from rear license lamp. Remove lacense lamp from rear bumper fascia. Remove license lamp bulb and socket from rear license lamp. Replace bulb and install using reverse procedure.
Where is the brake light failure sensor located on a 1998 accord?
The brake light failure sensor is located at the back of the left rear lamp assembly behind the trunk liner. It is a square circuit board about 2" x 2" connected by a wire pigtail to the main left rear brake and running lights.
What is the Hbl sw fuse on a jeep?
high beam lamp
