The roof load is a rating that determines how many pounds per square foot the roof will withstand. Most roofs are rated above 300 pounds per square foot or more.
example of static load test
Full load amps is the maximum rated amps that the motor should draw according to its nameplate rating. Running load amps is the actual amperage the motor is drawing at that point in time when the test is taken. Some motor loads vary depending on if the load is cyclic. The reading on this type of motor would be from no load amps to full load amps.
force
Simply stated, it is a factor that will increase the loading. There are numerous types of load factors. Dead, Live, Roof live, Snow, Wind, Seismic, etc.There are also several different combos, depending on which method you are using (LRFD or ASD). The highest combo is used to determine your ultimate load, qu.
it means a current as in an electrical current
how much weight you can put on it.
Live load Both are the same Live load is all the live loads which can be consider as variable load. Roof live load This is limited to few categories. man who climbed on to the roof can be consider as roof live load.
That number refers to the maximum load rating(94) and the maximum speed rating (V)
The 2005 Ford focus waken, roof rack has a weight rating of 450 pounds. The manufacturer recommends that you never exceed 450 pounds.
No, it is a dead load
The 99 is the load rating and the H is the speed rating. The higher the load number the more weight the tire can carry. The speed number H means it is rated to 130 mph.
The 99 is the load rating and the H is the speed rating. The higher the load number the more weight the tire can carry. The speed number H means it is rated to 130 mph.
108=the load rating per tire is 2205 lbs S=the speed rating on this tire is 112 mph
It is a "LIVE LOAD" which is the weight of snow for which a roof is designed for. It is usually 40 lbs. per square foot. Al dead load is the weight of the roof structure itself.
107 is the load rating of the tire the S is the speed rating and the rwl is raised white letters.
Grade 1 has a max load rating of 250 pounds. Grade 2 has a max load rating of 225 pounds. Grade 3 has a max load rating of 200 pounds.
example of static load test